Gas Seal An off-white, non-setting compound with good adhesion and gap filling properties<BR/>Unaffected by vibration but can be easily released<BR/>Ideal for use on all threaded and face joints on pipe work carrying natural gas, LPG, propane, butane, air, oils and aliphatic solvents<BR/>Resistant to Gas, LPG, Air, Oils, Solvents

ROCOL Layout Ink Fluid The ROCOL 1L blue layout ink fluid for metal marking. The thin, dry film enables clear, sharply defined lines to be scribed on most surfaces without flaking. This is formulated for use on bright or machined metal surfaces. It is resistant to washing off by water and water mix cutting fluids. Features and Benefits Easily to apply and removed with IPA Solvent cleaner<BR/>Allows clear, sharp definitions<BR/>Will not chip or flak<BR/>Pack type is bottle<BR/>Store undercover temperature ranges between 0°C and 30°C Applications Passive component troubleshooting<BR/>Electronic assembly<BR/>Quality control (component sorting)

A semi-fluid grease for use in automatic lubrication systems feeding highly loaded bearings. Also, very effective when used as a gearbox grease. Specifically designed for use on highly loaded bearings fed by small bore pipe work in automatic lubrication systems<BR/>Good load carrying capability – 355kg Weld Load<BR/>Has excellent stability – extended relubrication intervals and a reduction in lubricant usage<BR/>Excellent temperature range -20°C to +160°C<BR/>Provides a tenacious, EP film with excellent water wash off resistance and corrosion protection

Bakerlube HT Extreme high temperature graphited chain lubricant for bakery oven chains. High load carrying performance<BR/>Clean evaporating base oil<BR/>For temperatures where conventional fluids fail<BR/>Does not contain solvents<BR/>Temperature range wet film -10°C to +180°C<BR/>Temperature range dry film up to +550°C<BR/>NSF H2 registered

Foodlube Hi-Torque 220 High performance fully synthetic gear oils incorporating start up protection system (SUPS) and anti wear additives to provide maximum lubrication and protection in all types of gearboxes. SUPS - A unique protection for gear teeth on start up and in use <BR/>Outstanding load carrying performance: FZG load stage 12<BR/>Excellent anti-wear performance - no need for additional additive treatments<BR/>Temperature range –20°C to +150°C<BR/>NSF H1 registered

Foodlube Hi-Torque 150 High performance fully synthetic gear oils incorporating start up protection system (SUPS) and anti wear additives to provide maximum lubrication and protection in all types of gearboxes. SUPS - A unique protection for gear teeth on start up and in use <BR/>Outstanding load carrying performance: FZG load stage 12<BR/>Excellent anti-wear performance - no need for additional additive treatments<BR/>Temperature range –20°C to +150°C<BR/>NSF H1 registered

Foodlube Hi-Torque 460 Foodlube Hi Torque is a range of high performance foodgrade, synthetic gearbox fluids. Non-toxic gearbox lubricants with the unique Start Up Protection System that protects on start up as well as during use. Temperature range -20°C to 150°C<BR/>Outstanding EP performance (FZG load stage 12)<BR/>Highly resistant to water wash off<BR/>Increased service intervals<BR/>Excellent corrosion protection<BR/>Do not contact mineral hydrocarbons, animal materials, nut oils or genetically modified ingredients<BR/>FDA group 21 CFR 178.3570<BR/>NSF registered<BR/>DIN V 10517

<B>Food Grade, Multipurpose, Chain and Conveyor Lubricant</B> FOODLUBE CHAIN Fluid is a non-toxic, water resistant lubricant designed primarily for the effective lubrication of all types of chains & conveyors operating in food, pharmaceutical and other clean environments.<BR/><BR/>FOODLUBE CHAIN Fluid is an excellent all round lubricating fluid containing additives to boost performance and improve adhesion. It also offers excellent water wash off resistance and corrosion protection necessary for lubricants used in food, pharmaceutical and other clean environments. Excellent penetration properties<BR/>Tenacious low drip formulation<BR/>Outstanding corrosion protection<BR/>Good load carrying capacity<BR/>Good resistance to water wash off<BR/>Temperature range -20ºC to +150ºC<BR/>NSF H1 registered & ISO 21469 certified for full audit compliance<BR/>HALAL Certified<BR/>Kosher Certified<BR/>Vegan Trademark registered

Foodlube Hi-Torque 320 A non-toxic mineral hydrocarbon free gearbox fluid for use within clean environments<BR/>Made using FDA listed ingredients. <BR/>Good load carrying capabilities, FZG load stage 12<BR/>Tenacious non-drip film<BR/>Excellent corrosion protection<BR/>Resistant to water wash off<BR/>NSF H1 registered

Rocol FoodLube Lubricant The Rocol 20L Hi-Power high-performance lubricant is combined hydraulic, compressor and airline product. It is ideal for sub-zero gearboxes and chains down to -50°C depending on the application. This oil is thermally stable and is designed to give superior service life. It has incorporated the LCO (Low Carry Over) system to ensure maximum compressor efficiency. The non-toxic properties of this oil range make it ideal for use in food, pharmaceutical and other clean environments where NSF H1 lubricants are required. Features and Benefits Offers a wide temperature resistance and specific temperature range is dependent on viscosity<BR/>Can be used down to -50°C and up to 120°C, depending on viscosity grade<BR/>Special antioxidant combination gives high thermal stability providing longer fluid life with a lower deposit, sludge and varnish formation<BR/>Exhibits extremely low foaming tendencies combined <BR/>Excellent anti-wear properties to ensure reduced wear and longer machine life Applications Air compressors<BR/>Hydraulic systems <BR/>Airline lubricator bottles Certifications ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Foodlube Overhead Chain Fluid Specifically formulated to reduce contamination issues on all drive and conveyor chains. Ideal for the meat processing industry<BR/>Extremely tenacious film<BR/>No drip formulation<BR/>Excellent corrosion protection<BR/>Good water wash off properties<BR/>Temperature range -20°C to +150°C<BR/>NSF H1 registered

Sapphire 2 High Temperature Designed for all types of ball, roller and plain bearings at elevated temperatures<BR/>Resists carbonisation at high temperatures<BR/>Extends lubrication intervals<BR/>Excellent corrosion protection<BR/>Water resistant