3M 980 Series Ionized Air Gun Accessories The 980 series ionized air guns have been designed to be suitable for blowing particulate contaminants off most surfaces, even from static sensitive products. It neutralizes static charge that attracts particulates to a surface by releasing a constant stream of compressed ionized air or gas. It has the ability to reduce a charge of 1000 V to less than 100 V in less than a second and the loose particles can then easily be blown away.<BR/><BR/>Replacement/Optional Parts:<BR/>Users are able to replace the air-line filter and the emitter points at the tip of the hand unit. When required, these components can be easily replaced without the use of special tools.

SCS Heel Grounder The Heel Grounder HGC1M-EC delivers cost-effective compliance for high volume grounder use. It consists of a re-positionable, two-layer sole with a 18-inch multi-strand ribbon, which helps increase it's durability

SCS ESD Label The SCS ESD label is a permanent adhesive destructible label that provides precautionary warning while opening a packaging or handling potentially harmful objects. These labels are tamper proof or tamper evident to make it easy to identify whether the package has been opened or not. This tape has a symbol displaying ESD susceptible reaching hands symbol for pictorially displaying the warning. Features and Benefits • Easy to use<BR/>• Label dimensions are 1-7/8"x2-1/2"<BR/>• Permanent adhesive for it to remain permanently intact<BR/>• Tamper proof Applications • Ammunition industries<BR/>• Electrical systems<BR/>• Electronics manufacturing Certifications • ANSI certified

SCS SHIELD BAG The SCS 75MM x 125MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1<BR/>• REACH certification

SCS SHIELD BAG The SCS 100MM x 150MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1<BR/>• REACH certification

SCS SHIELD BAG The SCS 102MM x 152MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1<BR/>• REACH certification

SCS Moisture Caution Label The SCS 113 label is a 4in x 4in moisture caution label. This label can be used on moisture barrier bags to identify moisture sensitive devices for levels 2, 2a, 3, 4, 5 and 5a as defined by J-STD-020. The SCS ESD Label performs the function of providing precautionary warning while opening packaging or handling moisture sensitive devices. This permanent adhesive label is one time use and hence, tamper proof. It can be used on a wide variety of objects from different size of boxes to bags. Features and Benefits • Easy to apply<BR/>• One time use hence tamper proof<BR/>• Permanent adhesive for it to remain permanently intact Applications • Ammunition industries<BR/>• Electrical systems<BR/>• Electronics manufacturing

SCS MOISTURE BAG The SCS 152MM x 255MM x 0.0036in thick (3.6mil) moisture barrier bag is a multilayer bag which offers excellent protection against EMI, ESD, moisture absorption and heat. It has sealed closure. It is made from aluminized polyester and polyethylene material. The sealable design is for the packaging of electronic components under vacuum or inert gas immediately after production. These bags have ESD protection symbol and sensitive warning symbol printed on it. It is dissipative and supports static shielding. The bag is mainly designed for dry packaging of moisture sensitive devices. The bag provides physical protection for its contents. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Moisture barrier<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1

SCS SHIELD BAG The SCS 102MM x 102MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1<BR/>• REACH certification

SCS SHIELD BAG The SCS 51MM x 76MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1<BR/>• REACH certification

SCS SHIELD BAG The SCS 127MM x 76MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components

SCS SHIELD BAG The SCS 203MM x 457MM x 0.0028in thick (2.8mil) shield bag is made from metal-in film laminates and electrostatic discharge items. The shield bag provides physical protection for its contents. These bags have ESD protection symbol and sensitive warning symbol printed on it. It allows electrostatic charges to be removed when placed on grounded surfaces. These bags are manufactured from polyester, metal and polyethylene laminate. Dissipative surfaces make it suitable to be used in ESD protected areas. Features and Benefits • Antistatic<BR/>• Heat dissipative<BR/>• Static shielding<BR/>• Lightweight Applications • Storing electronic components Certifications • DIN EN61340-5-1