Powercheck 1557 PAT and Installation Verification Instrument A comprehensive PAT and Installation instrument verification system in one rugged, drop-proof enclosure. It allows on-going performance checks to be carried out on test equipment to ensure accurate measurement between calibration intervals Tests verified: Earth Continuity, Insulation Resistance, RCD Trip Time, RCD Trip Current, Loop, PE Conductor Current, Touch Current and Flash testsVerifies earth continuity or earth bond testers up to 25ADoes not trip RCD circuits Tests to BS 7671, BS EN 61557, IET Onsite Guide and IEE Code of PracticeConfirms performance between verifications as required by NICEIC, ELECSA, Corgi and othersNICEIC & IET compliant Colour coded controls for ease of use Compatible with all electrical installation and PAT testers

Seaward NTB-1 Portable RCD Isolator The NTB-1 is designed to eliminate the risk of tripping the main RCD when carrying out RCD trip time tests with RCD test instruments. It isolates the electricity supply to the RCD under test, allowing the test operative to continue testing without the worry of causing disruption to the premises they're working on by tripping the main RCD.In the past, isolation transformers have been used for this purpose, but these are bulky and typically weigh around 10kg in comparison to the Non Trip Box's (NTB) lightweight 0.6kg. The NTB-1 is portable and can be used with any test instrument which is used to carry out the RCD trip time test. Test portable RCDs without tripping the installation RCD Compact, lightweight and portable Universally compatible with all RCDs and RCD test instruments Can be used in all situations and locations where an RCD test is required230Vac/ 50Hz

Seaward PATGuard 3 Software Seaward PATGuard 3 is an easy-to-use software program which enables you to record, store and report on a range of health and safety requirements including PAT testing, risk assessments and other workplace test and inspections. Tag records with images as visual evidence, schedule retest periods and produce professional reports and certificates for total traceability. This specially designed PAT program is compatible with a wide range of PAT testers, including Seaward’s Apollo series safety management tool. This PAT software can also be used to store data recorded from any manual PAT tester. Key Features: • Full range of test reports and scheduling tools • Risk Assessment and Health & Safety reports • Tag photo's to assets, sites and locations • Network compatible • Built in Time Manager module Recommended PC system requirements: IBM Compatible PC Processor Speed 500Mhz or higher Microsoft Windows XP/Vista/7/8 512Mb RAM 50Mb available hard disk space Colour monitor with 32 bit colour or greater video card Internet connection or CD ROM drive Internet Explorer 8 or later.

Seaward Primetest 50 PAT Tester (Portable Appliance Tester) The Primetest 50 is a handheld lightweight portable PAT checker which is easy to use and features a simplified range of tests to ensure electrical appliances do not pose a danger to users. All results can be seen on an easy to ready LCD display with a pass or fail indication. Features and Benefits: Simple Push button PASS / FAIL checker of 240V Class I and II appliances and IEC mains leadsBattery powered for portable use even where no mains power supply is available6 x AA batteriesResults can be entered onto a PDA and transferred to Seaward PATguard software via the PATGuard Work About software Lead polarity TestPower socket TestPATMobile APP is available to downloadCompatible with Android 4.1 and higher and depends on device capabilitiesGo to "www.seaward.co.uk/PATMobile" Typical Applications: The Primetest 50 appliance checker is ideal:Service and Maintenance EngineersEducation (Schools and Colleges)Care homesLeisure Industry

Test n Tag Pro Printer (Serial and Bluetooth) The Test n Tag Pro prints durable synthetic asset labels which can include barcode, asset number, test date, next test date, user name and test status (dependent on which tester is being used). The Test n Tag Pro is ideal for use with the Apollo series testers (via Bluetooth) or PrimeTest 250 Plus (via serial cable)Lightweight and portableTest n Tag Pro Printer can be used with a rechargeable battery pack or primary cellsBluetooth connection: Apollo 600, Apollo 500 (only with 52 x 74mm labels)

Seaward PAT Checkbox The PAT Checkbox has been designed to provide a safe, simple and quick means of checking the calibration of the Seaward PATs, and will also check other Portable Appliance Testers, to ensure accurate testing. Accuracy ±1% + 1 digitCalibrated with a flash voltage of 3kVrmsInsulation resistance test voltage of 500VdcEarth BondEarth Leakage

Test n Tag Pro Printer (Serial) The Test n Tag Pro prints durable synthetic asset labels which can include barcode, asset number, test date, next test date, user name and test status (dependent on which tester is being used). Lightweight and portableTest n Tag Pro Printer can be used with a rechargeable battery pack or primary cellsUse in conjunction with the PrimeTest 250+ tester via serial cable

PrimeTest 250+ and Pro Bundle with software (UK) The PrimeTest 250+ PAT tester offers fast and efficient electrical safety testing with labelprinting and data storage, including free datalogger software. The PAT tester features all of the required tests of the IET 4th Edition Code of Practice along with USB downloadThe PrimeTest 250 Plus is also fully compatible with the new Test n Tag Pro serial printer for quick and easy label printing without any setup requiredPrimeTest 250+ and Pro Bundle with software is supplied with: PATGuard 3 Elite 1year license card, Test n Tag Pro printer (serial model), 4 x Test n Tag printer label rolls, PrimeTest checkbox, PATBag carry case, Cloverleaf adaptor, PAT Training DVD and Guide to PAT testing Key Features Plug and print - easy label printing with no setupDate stamped results for full traceabilitySingle key saveSingle key downloadStore 999 appliance recordsIndustry standard download formatTest 3 phase appliances Electrical Test Functions Low current earth continuity testguaranteeing accurate measurement (patent pending)Insulation resistance at 250 / 500VIEC lead testProtective conductor currentTouch current3 Phase leakage current (requires adaptor)Alternative leakage currentRCD test (30mA / 150mA)Power socket test

Seaward PrimeTest 100 (UK) The Primetest 100 is an easy-to-use 3 button operation handheld tester with the functionality of a PAT checker, an IEC lead and extension lead tester and a power socket polarity checker all in one compact device. All results can be seen on an easy to ready LCD display with a pass or fail indication. Features and Benefits: Two electrical safety checks in one tester6 automated test sequencesChecks appliance safety and socket safetySimple pushbutton test sequence giving for Class I, Class II, Leakage and Lead testsLCD display giving clear PASS/FAIL indicationTests Class I and II equipment including IT and business equipmentDifferential Leakage testExtension and IEC lead testsPower socket polarityDetects load of appliance under test to check for power switches which are off and/or appliances which may draw excessive currentPATMobile APP is available to download free from the Applestore / Google PlayCompatible with Android 4.1 and higher and depends on device capabilitiesGo to "www.seaward.co.uk/PATMobile" Typical Applications: The Primetest 100 appliance checker is ideal for:Service and Maintenance EngineersEducation (Schools and Colleges)Care homesLeisure Industry

Roll of PAT testing fail labels These high visibility labels are designed for use on items that have failed the PAT test. These labels provide clear, easily readable information that the product has failed the test and should not be used. Test dateInitials of testerAppliance / reference numberNext test due date1000 x Fail labels

Test n Tag Elite Printer Lead Lead for thermal MiniPrinter.

PATGuard 3 Elite 1 year license card The PATGuard license card is packaged as a card containing a download link and a serial number which will activate PATGuard 3 Elite for the time period specified on the card. The software has been designed as an in depth PAT management tool which contains all the most relevant recommendations covered by the IET Code of Practice including those relating to Health and SafetyThe Software is compatible with all downloading Seaward PAT Testers.Recommended PC system requirements: IBM Compatible PC Processor Speed 500Mhz or higher Microsoft Windows XP/Vista/7/8 512Mb RAM 50Mb available hard disk space Colour monitor with 32 bit colour or greater video card Internet connection or CD ROM drive Internet Explorer 8 or later