The Seeed Studio XIAO nRF52840 is an ultra-small size, ultra-low power Bluetooth development board based on the Nordic nRF52840. It features an on-board Bluetooth antenna, on-board battery charging chip, and 21*17.5mm thumb size, which makes it ideal for IoT projects. Powerful CPU- Nordic nRF52840, ARM® Cortex™-M4 32-bit processor with FPU operating at 64 MHz<BR/>Wireless capabilities- Bluetooth 5.0, NFC, and ZigBee module with on-board antenna<BR/>Ultra-small size- 21 x 17.5mm, Seeed Studio XIAO series classic form-factor for wearable devices<BR/>Ultra-low sleep power- 5 μA, deep sleep model

The Seeed Studio XIAO nRF52840 Sense is a tiny Bluetooth BLE development board designed for IoT and AI applications. It features an on-board antenna, 6 Dof IMU, microphone, all of which make it an ideal board to run AI using TinyML and TensorFlow Lite. Wireless capabilities<BR/>Ultra-small size<BR/>Ultra-low sleep power

The Seeed Studio XIAO RP2040 is a microcontroller using the Raspberry Pi RP2040 chip. The MCU runs at up to 133MHz.It is built with rich interfaces in a tiny thumb size and fully supports Arduino, MicroPython, and CircuitPython. The on-board interfaces are enough for developing multiple applications. Powerful MCU- Powered by RP2040 chip features high performance, low cost. and small package<BR/>High Performance- Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz, breezes through integer workloads<BR/>Rich on-chip resources- 264KB of SRAM, and 2MB of on-board Flash memory<BR/>Flexible I/O allows it to communicate with almost any external device<BR/>Flexible compatibility- Support Arduino / Micropython / CircuitPython<BR/>Easy project operation- Breadboard-friendly & SMD design, no components on the back<BR/>Small size- As small as a thumb(20x17.5mm) for wearable devices and small projects<BR/>Multiple interfaces- 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface<BR/>Low Cost- ease the barrier to entry

The Seeed Studio reServer Industrial, a powerful edge Inference server for intelligent video analytics. Upgrade legacy cameras effortlessly with the reServer, which can also perform on-site video analytics tasks, reducing the need for constant human monitoring. Fanless Compact Edge AI Server<BR/>Multi-Stream Processing

The Seeed Studio reComputer J40-series includes compact edge computers built with NVIDIA advanced AI embedded systems: Nvidia Jetson Orin NX and Seeed carrier board (reComputer J401). With rich expansion module, industrial peripherals, thermal management combined with decades of Seeed&#146;s hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI products emerging diverse AI scenarios. Fan with aluminum heatsink x1

The Seeed Studio reComputer J401 is a high-performance, interface rich NVIDIA Jetson Orin NX/Nano compatible carrier board, providing HDMI 2.1, Gigabit Ethernet, USB3.2, M.2 key E, M.2 key M, CSI camera, CAN, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. Seeed carrier board(reComputer J401) x1

The Seeed Studio reComputer Industrial series combines the NVIDIA Ampere GPU architecture and 64-bit operating capability to provide 20-100 TOPs modern AI performance at the edge based on different module choice, delivering up to 5x the performance of Jetson Xavier NX and up to 3X the performance of Jetson AGX Xavier. 16-Pin Terminal Block for DIO x1

The Seeed Studio reComputer Industrial series combines the NVIDIA Ampere GPU architecture and 64-bit operating capability to provide 20-100 TOPs modern AI performance at the edge based on different module choice, delivering up to 5x the performance of Jetson Xavier NX and up to 3X the performance of Jetson AGX Xavier. 16-Pin Terminal Block for DIO x1

The Seeed Studio reComputer J1010 are compact edge computers built with NVIDIA advanced AI embedded systems: Jetson Nano and Seeed reference carrier board (J101). With rich extension modules, industrial peripherals, thermal management combined with decades of Seeed&#146;s hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI product emerging diverse AI scenarios. Passive aluminium heatsink x1

The Seeed Studio reComputer J202 is a high-performance, interface rich NVIDIA Jetson Nano / Xavier NX/ TX2 NX compatible carrier board, providing HDMI 2.0, Gigabit Ethernet, USB3.0, M.2 key E wifi / BT, M.2 key M, CSI camera, CAN, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. 12V/5A power adapter x1

The Seeed Studio reComputer J10 series are compact edge computers built with NVIDIA advanced AI embedded system Jetson Nano and Seeed reference carrier board. With rich extension modules, industrial peripherals, thermal management combined with decades of Seeed Studio hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI product emerging diverse AI scenarios. Aluminium case (black) x1

The Seeed Studio reComputer J30-series includes compact edge computers built with NVIDIA advanced AI embedded systems: Nvidia Jetson Orin Nano and Seeed carrier board (reComputer J401). With rich expansion module, industrial peripherals, thermal management combined with decades of Seeed&#146;s hardware expertise, reComputer Jetson is ready to help you accelerate and scale the next-gen AI products emerging diverse AI scenarios. Fan with aluminum heatsink x1