The Silicon Labs EFM32LG series 64 pin microcontroller offers unmatched performance and ultra-low power consumption in both active and sleep modes. A 32-bit ARM CortexM3 processor making it perfect for battery-powered systems and systems with high-performance, low-energy requirements. It performs ultra-low power operation0.65 μA current in Stop (EM3), with brown-out detection and RAM retention63 μA/MHz in EM1211 μA/MHz in Run mode (EM0)It has fast wake-up time of 2 μsHardware cryptography (AES)32 kB of RAM used

EFR32MG21A010F1024IM32 EFR32MG21 Series 2 wireless SoCs include a 80 MHz ARM Cortex-M33 core, providing plenty of processing capability while a dedicated security core provides faster encryption, secure boot loading and debug access control. The device includes 1024 Flash, 96 RAM and is available in a QFN32 package. With up to + 10 dBm maximum power output and excellent receive sensitivity of -104 (250 kbps O-QPSK DSSS) dBm, the EFR32MG21A010F1024IM32 provides a robust RF link for reliable communications for Zigbee, Thread and multiprotocol applications and enables greater range and reliable RF communications. EFR32MG21A010F1024IM32 uses the same tools as EFR32MG Series 1, providing easy migration and fast time-to-market with development kits, SDKs, mobile apps and our patented network analyzer.

The Silicon Labs USB to UART bridge evaluation kit contains the following items CP2110 evaluation board, RS232 serial cable, USB cable, quick start guide. It is a highly-integrated HID USB-to-UART bridge controller providing a simple solution for updating RS-232 designs to USB using a minimum of components and PCB space. The CP2110 uses the standard USB HID device class which is natively supported by most operating systems. A custom driver does not need to be installed for this device. Integrated clock so no external crystal requiredIntegrated USB transceiver and no external resistors requiredOn-chip power-on reset circuitRoHS-compliant 28-pin QFNRoyalty-free distribution license

The Si7201-21-IV , Omnipolar Switch Magnetic Sensor is designed to simplify magnetic switch/latch needs. The low power and high sensitivity of this device make it ideally suited for many applications. The Si7201-21-IV supports a wide temperature range of -40 to +125 °C. Applications:Replacement of reed switches in consumer, and security applicationsPosition sensing of HVAC knob, door locks, windows, and other mechanical devicesBLDC motor controlCamera image stabilization, zoom, and autofocusFluid level sensingControl knobs and selector switchesGeneral-purpose mechanical position sensing

The Silicon Labs EFM32PG23 Gecko family of microcontrollers is part of the series 2 Gecko portfolio. EFM32PG23 Gecko MCUs are ideal for enabling energy-friendly embedded applications. 32-bit ARM Cortex-M33 core with 80 MHz maximum operating frequencyUp to 512 kB of flash and 64 kB of RAMRobust peripheral set and up to 34 GPIOLow energy operation21 uA/MHz (EM0)1.03 uA sleep (EM2)16-channel ADC with options for 12, 16, or 20-bit resolutionBest-in-class security with Secure Vault

The Silicon Labs EFM32WG series 64 pin microcontroller offers unmatched performance and ultra-low power consumption in both active and sleep modes. ARM Cortex-M4 processor making it perfect for battery-powered systems and systems with high-performance, low-energy requirements. It performs ultra-low power operation0.65 μA current in Stop (EM3), with brown-out detection and RAM retention63 μA/MHz in EM1211 μA/MHz in Run mode (EM0)It has fast wake-up time of 2 μsHardware cryptography (AES)32 kB of RAM used

The Silicon Labs pro kit is an ideal starting point for application development on the EFM8BB51 busy bee microcontrollers. The board features sensors and peripherals, demonstrating some of the many capabilities of the EFM8BB51 busy bee microcontroller. Additionally, the board is a fully featured debugger and energy monitoring tool that can be used with external applications. USB connectivityAdvanced energy monitorSEGGER J-Link on-board debuggerUser push buttons and LEDs8-direction analogue joystickBreakout pads for direct access to I/O pins

Adds Bluetooth 5 LE or Bluetooth mesh connectivity to any design easily and fastSupports high throughput, long range, and regular Bluetooth LE PHYsDelivers sub-1-meter location accuracy with Bluetooth 5.1 angle of arrival (AoA) Requires a total PCB area of 51 mm2 only, including antenna clearanceEliminates need for RF design expertiseContains all necessary external components, including antennaWorks with industry-proven, certified stacks and development tools from Silicon LabsSupports stand-alone and network co-processor (NCP) operationProvides easy migration path to discrete Blue Gecko SoC if applicableEnables rapid time-to-marketAchieves 400m range at +8 dBm TX and 700 m at +18 dBm TX (Open field, LOS)Includes Precision Low Frequency Oscillator meeting BLE Sleep Clock accuracy requirements and removing the need for an external crystal.

The USB Stick 3.0 is a reliable and efficient storage solution for your data needs. With a storage capacity of 128GB, this product offers ample space for all your important files and documents, ensuring that you never run out of storage space. The product is designed to provide fast and reliable data transfer speeds, making it ideal for use in a wide range of applications. 128GB storage capacityFast and reliable data transfer speedsHigh-quality construction for durabilityCompatible with a wide range of devicesIdeal for storing important files and documents

The Silicon Labs EFM32PG23 Gecko family of microcontrollers is part of the series 2 Gecko portfolio. EFM32PG23 Gecko MCUs are ideal for enabling energy-friendly embedded applications. 32-bit ARM Cortex-M33 core with 80 MHz maximum operating frequencyUp to 512 kB of flash and 64 kB of RAMRobust peripheral set and up to 34 GPIOLow energy operation21 uA/MHz (EM0)1.03 uA sleep (EM2)16-channel ADC with options for 12, 16, or 20-bit resolutionBest-in-class security with Secure Vault

The Silicon Labs PG23 pro kit contains sensors and peripherals demonstrating some of the EFM32PG23's many capabilities. The kit provides all necessary tools for developing an EFM32PG23 Gecko application. USB connectivityAdvanced energy monitor (AEM)SEGGER J-Link on-board debuggerDebug multiplexer supporting external hardware as well as on-board MCU4x10 segment LCDUser LEDs and push buttonsSilicon Labs' Si7021 relative humidity and temperature sensorSMA connector for IADC demonstrationInductive LC sensor

The Silicon Labs pro kit is an ideal starting point for application development on the EFM8BB52 busy bee microcontrollers. The board features sensors and peripherals, demonstrating some of the many capabilities of the EFM8BB52 busy bee Microcontroller. Additionally, the board is a fully featured debugger and energy monitoring tool that can be used with external applications. USB connectivityAdvanced energy monitorUser push buttons and LEDs8-direction analogue joystick20-pin 2.54 mm header for expansion boardsBreakout pads for direct access to I/O pins