SKF Bearing Unit Insert Cap, 35mm OD, 24.5mm Thickness - TU 5 M Series - ECY 207 Avoid workplace injury caused by exposed rotating shafts with this insert cap from SKF. It protects the exposed end of a shaft to keep workers safe. The sealed design keeps dust and dirt out of the ball bearing and ensures your machine can run at peak efficiency. Hard-wearing polypropylene material offers effective impact strength and fatigue resistance for use with heavy-duty applications. The cap's suitable for use on almost every SKF bearing unit with cast-iron housings, so it's a versatile option. • High operating temperature up to +100°C for challenging industrial settings• Chemical and corrosion resistance for durability• Light weight of 20g adds minimal load to the system for smooth operation Applications • Agricultural machinery• Food and beverage industry• Flour milling• Chemical plants How do I install this cover? This cover has a straightforward snap-in installation method for hassle-free fitting. With your machinery powered down and locked out, simply push the insert cap onto the end of the shaft and it fits snugly into a purpose-built groove on one side of the bearing unit.

Double Row - Angular Contact - Open Type Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller bearings to be used while still providing long service lifeQuieter and Cooler Running - With their optimal inner geometry, they run quieter and cooler and can tolerate longer maintenance intervalsPrecise Shaft Guidance - Due to precision manufacturing processes, almost all SKF angular contacts exceed standard tolerances, to provide a smoother, truer running shaft with less heat and fewer vibrationsHigh Temperature Capability - They can withstand relatively high operating temperatures without significant loss of dimensional stability

SKF Ball Bearing, 3.12 kN Dynamic Load Rating, 20 mm Outside Diameter - BA 9 This thrust ball bearing from SKF is designed for high performance in various applications. The steel construction and open type sealing arrangement make it durable and versatile. With an inside diameter of 9mm and a dynamic load rating of 3.12 kN, this ball bearing is suitable for a wide range of industrial uses. Features & Benefits • Thrust ball bearing type for single direction applications• Steel ball material ensures strength and durability• CN bearing clearance for precise operation• Open type sealing arrangement for easy maintenance Applications • Ideal for use in machinery requiring thrust ball bearings• Suitable for high-speed applications due to the limiting speed of 16000 r/min• Can be used in automotive applications for precise movement control Can it be used in high-speed machinery? Yes, the ball bearing is suitable for high-speed applications with a limiting speed of 16000 r/min. Is it compatible with automotive equipment? Yes, the SKF BA 9 ball bearing can be used in automotive applications for precise movement control. Will it provide long-lasting performance? Yes, the steel construction and quality design make this thrust ball bearing durable and reliable.

SKF Ball Bearing, 60mm Inside Diameter, 95mm Outside Diameter - 51212 This thrust ball bearing is designed for effective management of axial loads in various mechanical applications. Its durable construction and precise dimensions are essential for facilitating smooth motion and minimising wear in assemblies. This component is particularly beneficial in environments that require accurate alignment and load distribution, making it suitable for both industrial and commercial uses. Features & Benefits • Open type design facilitates installation and maintenance • Steel construction provides high durability and strength • Capable thrust bearing load ratings ensure performance • Single row configuration allows for efficient load transfer • Sheet metal cage improves stability and diminishes friction • Specifically designed for applications with axial load needs Applications • For aligning components in automation systems • Used in electrical machines to enhance efficiency • Applicable in mechanical assemblies requiring precise load application • Suitable for industrial machinery subjected to axial forces What are the load capacities for handling axial loads? The static load rating is 140kN, while the dynamic load rating is 59.2kN. Is this suitable for high-speed applications? Yes, it is designed for consistent performance across various speed ranges. How can I determine if it fits my existing setup? Check the inside and outside diameter specifications for compatibility. What maintenance is required to ensure longevity? Regular inspections and lubrication can optimise performance. Can it be used in harsh environmental conditions? Its open type design is appropriate for controlled environments it should be protected from contaminants.

SKF Ball Bearing, Deep-Groove Bearing Type, 25mm ID, 47mm OD - 6005-Z Looking for a versatile and reliable bearing? Try this deep-groove cylindrical ball bearing from SKF. Its optimised design helps to keep the unit running cool and reduces wear. As both sides are shielded, there's little chance of its lubricant leaking, which boosts performance and minimises environmental impact. Rolling elements manufactured to close tolerances give you the benefit of low vibration, which helps to keep your machinery operating smoothly and efficiently. With a light weight of just 8g, this bearing adds minimal strain to equipment. Features & Benefits • Can be used to handle both radial and axial loads in either direction• Made from robust steel that resists corrosion, so it's suitable for humid or harsh operating environments• Outer diameter of 47mm lets you downsize equipment for productivity• Surface topography encourages the formation of a hydrodynamic lubricant film to maximise lubricant use for a light carbon footprint Applications • Automated assembly lines• Textile industry• Paper and pulp mills• Shipyards What's the maximum rotational speed of this ball bearing? This bearing has a limiting speed of 20,000r/min, which is the maximum speed it rotates at safely without loss of performance.

The SKF deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from skf in many designs, variants and sizes. It has 30 mm ID and 62 mm OD. Bearing is of bearing steelCylindrical bore type

SKF General Purpose Mineral Oil Grease, 1kg, 110mm²/s Viscosity - LGMT 2/1 Use this grease from SKF to improve and maintain the performance of your machinery. Its mineral oil base is a highly effective lubricant so it's suitable for a wide range of industrial and automotive applications, even where metal particles are present. Mineral oil is also resistant to oxidation so the grease maintains its composition when exposed to air. Thanks to a broad operating temperature range of -30°C to +120°C, you can rely on this grease in harsh conditions. • Tin container is corrosion-resistant for enhanced durability• Shelf life of five years for long-term use and storage• Water-resistant for use in humid environments• Large 1kg size for multiple applications Applications • Automotive engineering• Industrial machines• Conveyor systems• Ball bearings• Gear shafts How effective is this grease in hot environments? This grease contains a lithium thickener that keeps it in paste form for up to 50 hours at a temperature of +80°C. Under the mechanical stability test at these parameters, it showed stability of +50. This means it won't thin or leak even in extreme conditions.

SKF E2 Energy Efficient Bearings SKF E2 Energy Efficient Bearings are deep-groove, shielded, ultra-low friction bearings that feature an optimised design, balanced between internal geometry, grease and cage type. With 30 to 50% lower friction when compared with standard SKF bearings, the energy savings achievable when using SKF Energy Efficient Bearings are substantial, and the bearing life is extended significantly - in most cases more than double. SKF E2 Energy Efficient Bearings offer ultra-low friction and typically generate less heat and can operate at higher speeds than ISO or SKF Explorer Bearings. Dimensionally fully-compatible with standard bearings Typical applications for SKF Energy Efficient Bearings include: Electric motors up to 37kW (50HP)Light to medium-loaded machines with shaft diameters up to 60mmExcellent drop-in replacement for in-service electric motors

SKF Ball Bearing, Plain Race, Deep Groove, 12mm ID, 32mm OD - E2.6201-2Z/C3 When you need a low-friction ball bearing for your electric motor, choose this energy-efficient option from SKF. It's designed with a deep groove and a polymer cage for smooth running and minimal heat generation. A precision-engineered raceway ensures rotation is smooth, even at high speeds. As it decreases frictional drag, this unit helps to reduce the power consumption of motors. The rolling parts are greased to improve movement further and there's shielding on the ends to keep the lubrication in and large dust particles out, so it keeps working reliably. • Supports radial and axial loads to aid the movement and durability of motors• Polymer cage is resistant to moisture, chemicals and corrosion• Versatile ball bearing works with electric motors up to 37kW• Standard dimensions with an inside diameter of 12mm, making it suitable for machine repairs and upgrades Applications • Mining machinery• Food and beverage industries• Domestic appliances What's this ball bearing made from? The bearing's inner and outer rings, along with the balls, are made from steel. This makes it mechanically strong and resistant to corrosion.

SKF Ball Bearing, Deep-Groove Bearing Type, 80mm ID, 140mm OD - 6216-2Z For the seamless operation of the moving parts of your industrial equipment, choose this ball bearing from SKF. It's designed with deep raceway grooves that support the free movement of its balls, ensuring stability for axial and radial loads. With an 80mm internal diameter, this unit is a practical choice for medium-sized shafts. It's made entirely of steel, so it can withstand the impacts and corrosive substances you'd expect in harsh environments. Features & Benefits • Integral non-contact sealing keeps lubricant in and prevents contamination for prolonged service life• Static load rating of 55kN and dynamic load rating of 72.8kN for use with heavy-duty applications• Light weight of 1.53kg for easy handling during installation Applications • Grinding machines• Production equipment• Robotics and automation systems At what speed does this bearing operate? This bearing has a reference speed of 9,500r/min and a limiting speed of 4,800r/min, making it able to handle the demands of fast-paced machinery. How do I maintain this ball bearing? As this unit is made of weatherproof materials, it needs little or no maintenance. Regular inspection and removal of external dirt should keep it in good working condition.

The SKF deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs, variants and sizes. It has 17 mm ID and 35 mm OD. Bearing material is of hybrid ceramicCylindrical bore type

SKF Plain Deep-Groove Ball Bearing, 10mm ID, 30mm OD - 6200/C3 Keep heavy machine loads protected and free from friction wear with this SKF deep-groove ball bearing. It has an inner ring and an outer ring that enclose a smooth raceway. This holds eight balls in a single row, these rotate with machine movement and allow the unit to bear radial or axial loads in one direction. An open-end design means you can add lubricant to the workings and keep the unit running efficiently without removing it from your machinery. • Made from corrosion-resistant steel for durability and long-lasting performance• Slim design with a 30mm outer diameter to minimise space use• 36,000r/min (rotations per minute) limiting speed for high-velocity use Applications • Marine cargo vessels• Vehicle engines• Paper manufacturing• Hydrocarbon processing• Medical equipment What's this ball bearing's load capacity? This ball bearing has a static load rating of 2.36kN (kilonewtons) and a dynamic load rating of 5.4kN. A load rating is how much weight the ball bearing can hold without being damaged or losing stability. A static load is a load that doesn't move, and a dynamic load is one that extends or retracts during machine operation.