The SMC VM Mechanical Valve referred to as directional control valve regulate compressed air flow to connected components in pneumatic systems. It has a variety of actuator types with piping options of side ported and bottom ported to choose from. Compact sizeLightweight valve

AD Series Accessories A selection of accessories to be used with the AF Series modular air filters.

CG1 Air Cylinder The CG1 series from SMC are precision air cylinders which have various bore sizes to meet the any application need. These cylinders allow low break away pressure, smooth stroke action, has auto switch capability and multiple mounting options. Air Cylinder, Double Acting, Single RodBuilt-in magnetProof pressure: 1.5 MPaMaximum operating pressure: 1.0 MPaMinimum operating pressure: 0.05 MPaCushion: Rubber bumper

CG1 Air Cylinder The CG1 series from SMC are precision air cylinders which have various bore sizes to meet the any application need. These cylinders allow low break away pressure, smooth stroke action, has auto switch capability and multiple mounting options. Air Cylinder, Double Acting, Single RodBuilt-in magnetProof pressure: 1.5 MPaMaximum operating pressure: 1.0 MPaMinimum operating pressure: 0.05 MPaCushion: Rubber bumper

CG1 Air Cylinder The CG1 series from SMC are precision air cylinders which have various bore sizes to meet the any application need. These cylinders allow low break away pressure, smooth stroke action, has auto switch capability and multiple mounting options. Air Cylinder, Double Acting, Single RodBuilt-in magnetProof pressure: 1.5 MPaMaximum operating pressure: 1.0 MPaMinimum operating pressure: 0.05 MPaCushion: Rubber bumper

The SMC series KKA S coupler with Plug , body material is stainless steel 304. Threads sizes available R, Rc, from 1/8 to 1 1/2. Male threadBody size 1/8, 1/4, 1/2, 3/4, 1, 1 1/4.Applicable Port Size R1/8, R1/4, R3/8, R1/2, R3/4, R1, R1 1/4, R1 1/2

Male Elbow KQ2L The KQ2L male elbow fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2L male elbows are also more compact in design which means that these elbows can be used within a confined space. Male elbow fittings are to be used to pipe a female thread at a right angle. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Thread-to-Tube Adaptors Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C) All thread sizes are specified as R(PT) (taper) type

The SMC series AR-B regulators cost effective and clean looking offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR series connects with other SMC air preparation equipment. Modular type regulator Available with built-in backflow mechanism Optional embedded pressure gauge Rc, NPT or G(PF) threads Diaphragm is made of ozone resistant rubber material (HNBR)

The SMC speed controller tamper proof and flat head screwdriver adjust variants require a tool to change settings. The flow rate can be adjusted with a special tool and has extra protection against inadvertent operation. In-line, compact, one-touch fittingsMaximum operating pressure 1 MPaApplicable tube material are nylon, soft nylon, polyurethaneBody size M3, M5, 1/8, 1/4, 3/8 and 1/2

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators

Male Connector KQ2H The KQ2H male connector fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2H male connectors are also more compact in design which means that these connectors can be used within a confined space. Male connectors are designed to pipe a female thread. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Various port size's available One-touch Unifit versions available Available with thread sealant Thread-to-Tube Adaptors Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C) All thread sizes are specified as R(PT) (taper) type

Male Connector KQ2H The KQ2H male connector fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2H male connectors are also more compact in design which means that these connectors can be used within a confined space. Male connectors are designed to pipe a female thread. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Various port size's available One-touch Unifit versions available Available with thread sealant Thread-to-Tube Adaptors Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C) All thread sizes are specified as R(PT) (taper) type