Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits • For areas with explosion hazard<BR/>• Large convection surface<BR/>• Clip and screw flange fixing<BR/>• Ready-to-use with strain relief<BR/>• Maintenance free<BR/>• Temperature class T3 (200°C max) 50 W to 250 W<BR/>• Temperature class T4 (135°C max) 50 W to 200 W<BR/>• Temperature class T5 (100°C max) 50 W to 100 W

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits • For areas with explosion hazard<BR/>• Large convection surface<BR/>• Clip and screw flange fixing<BR/>• Ready-to-use with strain relief<BR/>• Maintenance free<BR/>• Temperature class T3 (200°C max) 50 W to 250 W<BR/>• Temperature class T4 (135°C max) 50 W to 200 W<BR/>• Temperature class T5 (100°C max) 50 W to 100 W

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits • For areas with explosion hazard<BR/>• Large convection surface<BR/>• Clip and screw flange fixing<BR/>• Ready-to-use with strain relief<BR/>• Maintenance free<BR/>• Temperature class T3 (200°C max) 50 W to 250 W<BR/>• Temperature class T4 (135°C max) 50 W to 200 W<BR/>• Temperature class T5 (100°C max) 50 W to 100 W

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits • For areas with explosion hazard<BR/>• Large convection surface<BR/>• Clip and screw flange fixing<BR/>• Ready-to-use with strain relief<BR/>• Maintenance free<BR/>• Temperature class T3 (200°C max) 50 W to 250 W<BR/>• Temperature class T4 (135°C max) 50 W to 200 W<BR/>• Temperature class T5 (100°C max) 50 W to 100 W

Roof Filter Fans Roof filter fans for use in enclosures and housings, from which warm air has to be diverted to lower the internal temperature. These low-noise roof filter fans are used to expel warm air from within the enclosure to protect the internal devices from overheating. To exchange the filter mat the hood can be easily opened without tools. The roof exit filter provides passive ventilation. Very low noise<BR/>Minimal depth in enclosure<BR/>High through-flow air volume<BR/>High reliability<BR/>Time-saving installation and mat exchange

Roof Filter Fans Roof filter fans for use in enclosures and housings, from which warm air has to be diverted to lower the internal temperature. These low-noise roof filter fans are used to expel warm air from within the enclosure to protect the internal devices from overheating. To exchange the filter mat the hood can be easily opened without tools. The roof exit filter provides passive ventilation. Very low noise<BR/>Minimal depth in enclosure<BR/>High through-flow air volume<BR/>High reliability<BR/>Time-saving installation and mat exchange

Stego AC Electronic Thermostats, ETR 011 Series An electronic thermostat for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via a relay with change-over contact. The LED integrated in the adjustment knob is lit when the NC contact is closed. Large setting range<BR/>Small hysteresis<BR/>Optical operating display (LED)<BR/>Change-over contact<BR/>Clip fixing

Roof Filter Fans Roof filter fans for use in enclosures and housings, from which warm air has to be diverted to lower the internal temperature. These low-noise roof filter fans are used to expel warm air from within the enclosure to protect the internal devices from overheating. To exchange the filter mat the hood can be easily opened without tools. The roof exit filter provides passive ventilation. Very low noise<BR/>Minimal depth in enclosure<BR/>High through-flow air volume<BR/>High reliability<BR/>Time-saving installation and mat exchange

Stego Filter Fans Plus, FPI/FPO Series The Filter Fan Plus series has been designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. Reducing the heat inside the enclosure improves performance and reliability of the electronic items and ultimately costs are kept lower. FPI or FPO To choose which items are best for your application first decide which you need, FPI or FPO. Both systems utilise a new air-flap on the outlet which gives a higher degree of airflow to expel heated air more efficiently. <BR/><BR/>The FPI system is for your more standard set-ups. A filtered fan is placed at the lower part of the enclosure pulling cooler air in. The air works its way up through the enclosure until it is expelled through the air-flap outlet mounted at the top end of the enclosure. <BR/><BR/>The FPO system has a filtered inlet placed at the lower end of the enclosure but does not include the fan. Instead the fan is placed on the outlet pushing air out of the enclosure which ultimately means the air is drawn in from the lower intake. This system is better for enclosures suffering from hot air pockets at the top of the enclosure. Ordering Please note when ordering you need to order the inlet and outlet units separately. As an example, for a 230 V ac, 92 mm, FPI system you need to order item <a href="/web/p/products/9159987">915-9987</a> (filter fan inlet) and item <a href="/web/p/products/9160019">916-0019</a> (outlet). Various sizes are available and each unit has its compatible partner listed in essential accessories for that size. Each size also has a 230 V ac and a 110 V ac fan to choose from. Mounting The front section mounts to the rear section with a simple ratchet type system making instillation quick and simple. It accommodates various panel thicknesses and can easily be released if necessary. Features New air-flap outlet technology for high airflow<BR/>Easy Mounting<BR/>Protection type test/Environmental rating by independent testing institutes (VDE and UL)<BR/>Two systems for optimal airflow (FPI/FPO)<BR/>Standard enclosure cut-out sizes (5 sizes)<BR/>Filter mat included with the FPI system filter fan and FPO intake filter.

Stego Elektrotechnik Filter Fan The Stego Elektrotechnik filter fan provides a filtered airflow of 42m³/h and has a supply voltage rating of 230VAC. This fan is designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. By reducing the heat inside the enclosure, this fan improves the performance and reliability of the electronic items and ultimately the cost is reduced. It has a face height of 152mm, face width of 152mm and installation depth of 66mm. Features and Benefits New air-flap outlet technology for high airflow<BR/>Easy mounting<BR/>Single filter mat system design<BR/>Filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure<BR/>FPI system consists of a filter fan and exhaust filter (ordered separately)<BR/>Designed for indoor use<BR/>Wire termination type Certifications IP54 rated<BR/>ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Stego Elektrotechnik Filter Fan The Stego Elektrotechnik filter fan provides a filtered airflow of 13m³/h and has a supply voltage rating of 230VAC. This fan is designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. By reducing the heat inside the enclosure, this fan improves the performance and reliability of the electronic items and ultimately the cost is reduced. This fan has a face height of 120mm, face width of 120mm and installation depth of 66mm. Features and Benefits New air-flap outlet technology for high airflow<BR/>Easy mounting<BR/>Single filter mat system design<BR/>Filter fan located in the lower part of the enclosure draws cleaner, cooler air into the enclosure<BR/>FPI system consists of a filter fan and exhaust filter (ordered separately)<BR/>Designed for indoor use<BR/>Ratchet Mechanism is used for mounting and provides high stability and tightness<BR/>Wire termination type Certifications IP54 rated<BR/>ANSI/ESD S20.20:2014<BR/>BS EN 61340-5-1:2007

Stego Filter Fans Plus, FPI/FPO Series The Filter Fan Plus series has been designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. Reducing the heat inside the enclosure improves performance and reliability of the electronic items and ultimately costs are kept lower. FPI or FPO To choose which items are best for your application first decide which you need, FPI or FPO. Both systems utilise a new air-flap on the outlet which gives a higher degree of airflow to expel heated air more efficiently. <BR/><BR/>The FPI system is for your more standard set-ups. A filtered fan is placed at the lower part of the enclosure pulling cooler air in. The air works its way up through the enclosure until it is expelled through the air-flap outlet mounted at the top end of the enclosure. <BR/><BR/>The FPO system has a filtered inlet placed at the lower end of the enclosure but does not include the fan. Instead the fan is placed on the outlet pushing air out of the enclosure which ultimately means the air is drawn in from the lower intake. This system is better for enclosures suffering from hot air pockets at the top of the enclosure. Ordering Please note when ordering you need to order the inlet and outlet units separately. As an example, for a 230 V ac, 92 mm, FPI system you need to order item <a href="/web/p/products/9159987">915-9987</a> (filter fan inlet) and item <a href="/web/p/products/9160019">916-0019</a> (outlet). Various sizes are available and each unit has its compatible partner listed in essential accessories for that size. Each size also has a 230 V ac and a 110 V ac fan to choose from. Mounting The front section mounts to the rear section with a simple ratchet type system making instillation quick and simple. It accommodates various panel thicknesses and can easily be released if necessary. Features New air-flap outlet technology for high airflow<BR/>Easy Mounting<BR/>Protection type test/Environmental rating by independent testing institutes (VDE and UL)<BR/>Two systems for optimal airflow (FPI/FPO)<BR/>Standard enclosure cut-out sizes (5 sizes)<BR/>Filter mat included with the FPI system filter fan and FPO intake filter.