Steinel Glue Gun The Steinel glue gun has an electrical rating of 240VAC euro supply voltage. This gluematic 5000 hot-melt glue applicator is used with 11.7mm glue sticks. When it comes to professional use, factors such as quality, reliability and ergonomics are extremely important. In this respect, the GluePRO 300 sets standards. Its sturdy quality and design are made for effortless and fatigue-free work. The stroke adjustment function makes it possible to set the quantity of glue per stroke for any specific application. The non-slip grip handle provides additional safety while working. The heating element and electronic components are designed to withstand rugged use for long periods of time. This hot-melt glue applicator is indispensable in industry and trade. Features and Benefits • 50% less effort• Average power consumption is 90W• Changeable nozzle• Ergonomic handling• Individual stroke adjustment• Modal folding box• Output, heat-up phase is 300W• Precise electronic temperature control• Reduced wear by patented parallel-feed• Regulated pipe heaters guarantee faster heating and a constant temperature• Temperature is 190°C Applications • Building and construction• Electronics• Product assembly• Transportation

The Heat Gun is a powerful all rounder has no problem coping with most hot air jobs in the workshop and on the construction site. This is not only down to the high performance motor but also optimised ergonomics and practical single hand operation. For intense work sessions without fatigueGateway to the professional class

Steinel Glue Gun The Steinel glue gun has an electrical rating of 240VAC euro supply voltage. This is a 400 LCD gluematic 5000 hot-melt glue applicator. This is used with 11.7mm glue sticks. Exploiting the full potential of hot-melt gluing often demands the use of high-quality adhesives with specific melting points. This glue gun LCD has the capability of setting its temperature to the accuracy of one degree. Whether acrylates demanding a high-temperature or low temperature low-melt adhesives, the required temperature is set easily and conveniently on this product. Features and Benefits • 50% less effort• Average power consumption is 110W• Changeable nozzle• Degree-accurate temperature adjustment• Ergonomic handling• Individual stroke adjustment• Modal folding box• Output, heat-up phase is 400W• Reduced wear by patented parallel-feed• Regulated pipe heaters guarantee faster heating and a constant temperature• Temperature ranges between 40°C and 230°C Applications • Building and construction• Electronics• Product assembly• Transportation

Professional gluing to the accuracy of a degree. Virtually any hot-melt adhesive can be used. Including acrylates demanding a high temperature or low-temperature Low Melt adhesives. The GluePRO 400 LCD is the ergonomic hot-melt glue applicator for professional use in industry and the trades, producing optimum results with the capability of setting the temperature to an accuracy of one degree. With a display for monitoring temperature to the accuracy of one degree (40-230°C). Heats up in under two minutes. Exploiting the full potential of hot-melt gluing often demands the use of high-quality adhesives with specific melting points. With the GluePRO 400 LCD and the capability of setting its temperature to the accuracy of one degree, this is where the sky's the limit. Whether acrylates demanding a high temperature or low-temperature Low Melt adhesives, the required temperature is set easily and conveniently on the tool. The GluePRO 400 LCD is the hot-melt glue applicator for professionals who work every day with adhesives that perform best when they are applied at the perfect temperature.

Steinel Glue Gun The Steinel glue gun has an electrical rating of 230VAC euro supply voltage. When it comes to professional use, factors such as quality, reliability, and ergonomics are extremely important. In this respect the GluePRO 300 sets standards. Its robust quality and design are made for effortless and fatigue-free work. The stroke adjustment function makes it possible to set the quantity of glue per stroke for any specific application. The non-slip grip handle provides additional safety while working. The heating element and electronic components are designed to withstand rugged use for long periods of time. This hot-melt glue applicator is indispensable in industry and trade. Features and Benefits • 50% less effort• Average power consumption is 90W• Changeable nozzle• Ergonomic handling• Individual stroke adjustment• Modal case• Output, heat-up phase is 300W• Precise electronic temperature control• Reduced wear by patented parallel-feed• Regulated pipe heaters guarantee faster heating and a constant temperature• Temperature is 190°C Applications • Building and construction• Electronics• Product assembly• Transportation

Glue with low application temperature for heat-sensitive materials, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 400 LCD, temperature: 130°C, firm after a maximum of 80 seconds, strong bond after approx. 40 seconds. Its low melting temperature makes the Low-Melt adhesive particularly suitable for heat-sensitive materials, such as PU foam and polystyrene. With an application temperature of only 130°C, it protects the base surface it is applied to. The material is firm after a maximum of 80 seconds, with a strong bond being provided after approx. 40 seconds. (Times and recommended adhesive are rough guides only).

Steinel Heat Gun The Steinel HL1620S heat gun has a maximum air temperature of 550°C and an airflow of 450L/min. It is ideal for drying plasterwork, adding heat shrink, thawing frozen water pipes, stripping paint and much more. This gun is featuring an optimized centre of gravity that enables single-handed use and an integrated thermal cut-out to prevent overheating. This gun is designed to the Steinel high standard of quality, the hot air gun is built to last a good 20% longer than its predecessor model. Features and Benefits Wattage of 1.6kWType G - British plugSupply voltage is 240V Applications Paint strippingCleaningCrimpingShapingMending

Steinel Heat Gun The Steinel HL1820S heat gun has a maximum air temperature of 550°C and an airflow of 500L/min. This is a multi-purpose, corded heat gun with a cool air stage. This device enables temperature adjustment from 50°C to 400°C to 600°C in 3 stages and airflow adjustment (4cfm, 7cfm and 13cfm) as well. The optimized weight balance virtually rules out fatigue while working. The ergonomically shaped handle with soft inlay ensures optimum handling and the integrated thermal cut-out prevents overheating. This tool can be used with all industry-standard nozzles. Features and Benefits Wattage of 1.3kW3 stage switch cool/ low/ highDual air filtersDuratherm heating elementSoft grip handleRubber standRubber power cable

General-purpose hot-melt adhesive for professionals, solvent-free, 600 g (20 sticks), Ø 11 mm, for GluePRO 300 and GluePRO 400 LCD, temperature: 190°C, firm after 15 seconds, strong bond after 60 - 90 seconds. Our universal adhesive bonds a vast range of materials, such as wood, paper, card, fabrics, glass, ceramics, metal and many plastics, such as ABS, melamine, PA, PC, PE, PET, PMMA, POM, PP, PVC and rigid PVC, making it the ideal all-rounder for industry and the trades. The solvent-free adhesive can be applied at a temperature of 190°C and is firm after a maximum of 15 seconds, providing a strong bond after about 60 – 90 seconds. (Times and recommended adhesive are rough guides only).

Steinel Heat Gun The Steinel HL1820S heat gun has a maximum air temperature of 600°C and an airflow of 500L/min. This is a multi-purpose, corded heat gun with a cool air stage. This device enables temperature adjustment from 50°C to 400°C to 600°C in 3 stages and airflow adjustment (4cfm, 7cfm and 13cfm) as well. The optimized weight balance virtually rules out fatigue while working. The ergonomically shaped handle with soft inlay ensures optimum handling and the integrated thermal cut-out prevents overheating. This tool can be used with all industry-standard nozzles. Features and Benefits Wattage of 1.8kWType G - British 3-pinSupply voltage is 240V3-stage switch - cool/ low/ highDual air filtersDuratherm heating elementSoft grip handleRubber standRubber power cable

The Heat Gun operates at 1.6kW with a voltage rating of 230V, making it suitable for various heating applications. It features a design with an optimized centre of gravity, allowing for fatigue free working with one hand. The ergonomic design fits comfortably into the hand, further enhancing user comfort and reducing strain during extended use. With integrated thermal cut outBrush motor and 2.2 m power cord

Steinel Heat Gun Accessories A range of professional heat gun accessories from Steinel. Designed for use with various Steinel hot guns including the HG2300EM and HL 1920E models.75 mm Surface Nozzle Evenly spreads air over a large area making it ideal for drying filler, stripping paint or removing plastic films. 75 mm Window Nozzle Designed to deflect the delivery of air to prevent panes of glass from damage. 24 mm Reflector Nozzle Ideal for soldering pipes, fitting heat shrink, and bending pipes.