The Teroson high quality, strongly adhesive sealing tape based on butyl rubber with plasto-elastic properties. It has butyl rubber as a backing material and is black in colour. Higher temperature influence for a short time has no adverse effect on quality and function

The Teroson adhesive is a gun-grade, one-component adhesive/sealant based on silane modified polymers, which cures by reaction with moisture to an elastic product. The skin formation and curing times are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these times can be reduced, low temperature as well as low moisture retard the process. Good adhesion to many substratesGood UV resistance and can therefore be used for interior and exterior applicationsSkin formation time, min: approx. 4 to 10Cure rate, mm/24 hrs: approx. 3

The Teroson adhesive is a high viscosity, sag resistant one component adhesive based on silane modified polymer, which cures by reaction with moisture to an elastic product. The skin formation and curing times are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these times can be reduced, low temperature as well as low moisture retard the process. It is free of solvents, isocyanates, silicones and PVC. Forms a soft elastic productOne component - requires no mixingGood UV resistanceAllows accelerated curing as two-component materialUsed for elastic bonding on metallic or painted substrates as well as for adhesive sealing's of all kinds

The Loctite solvent free, permanently plastic, self-adhesive sealant based on synthetic rubber serves as a good corrosion protection and can be painted with conventional paints based on oil and synthetic resins. Ideal for gap and breakthrough fillingGood water and ageing resistanceNo application equipment neededEasy, safe and clean to useSelf-welding

The Teroson adhesive is a gun-grade, one-component adhesive/sealant based on silane modified polymers, which cures by reaction with moisture to an elastic product. The skin formation and curing times are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these times can be reduced, low temperature as well as low moisture retard the process. Good adhesion to many substrates good UV resistance and can therefore be used for interior and exterior applicationsSkin formation time, min: approx. 4 to 10Cure rate, mm/24 hrs: approx. 3

The Teroson heavy pressure sensitive bitumen sound deadening foil based on high quality polymer-modified bitumen and special fillers. It has dimensions 500x500x2.6mm. Has adhesive backingThe adhesive side is protected from the effects of transportation and storage

The Teroson adhesive has excellent adhesion to glass, glass with ceramic coating, encapsulation and to painted surfaces, in connection with primer/activator. It is used for the bonding of front, rear and side screens to the body of motor vehicles (car, truck, bus). Very good sag resistanceHigh cure rateHigh shear strength and good elasticity, even after aging

The Teroson VR 1000 is a polyethylene foam tape coated on both sides with acrylic adhesive. One side is covered with a polyethylene fim as a separating medium. It is used in particular for bonding and attachment of protective and decorative trims or insignias and fixing of PVC or PU integral skin foam panels. High resistance to weathering and UVDouble sided adhesive tape

The Teroson adhesive is a gun-grade, one-component adhesive/sealant based on silane modified polymers, which cures by reaction with moisture to an elastic product. The skin formation and curing times are dependent on humidity and temperature, and the curing time also depends on joint depth. By increasing the temperature and moisture these times can be reduced, low temperature as well as low moisture retard the process. Good adhesion to many substratesGood UV resistance and can therefore be used for interior and exterior applicationsSkin formation time, min. approx. 4 to 10Cure rate, mm/24 hrs approx. 3

The Henkels polymer adhesive/sealant used for elastic sealing and cures to an elastomeric thermoset product. It is a gun-grade, one-component adhesive/sealant based on silane modified polymers, which cures by reaction with moisture to an elastic product. It can be used for elastic bonding of metals and plastics, elastic, interior and/or exterior seam and joint sealing. Pasty and thixotropic1-part, low modulus, flexibleUV resistant, sag-resistantNon-corrosive and free of solventsIsocyanates, silicones and PVC

The Teroson solvent free, permanently plastic, multipurpose sealant based on synthetic rubber. It serves as a good corrosion protection and can be painted with conventional paints based on oil and synthetic resins. Material exhibits very good water and aging resistanceExcellent compatibility with a variety of substrates

The Teroson multi-purpose adhesive tape. It has three layers which are synthetic rubber adhesive layer, an integrated fabric layer and a waterproof layer of polyethylene. Suitable for indoor and outdoor applicationSuitable for most surfaces