W Robinson And Sons Water Pump The W Robinson And Sons sprinkler water pump is the latest device manufactured from stainless steel. This centrifugal pump is used for water supply and irrigation applications. It is an effective product with a maximum flow rate of 50L/minute. It is a single-phase and self-priming 1inch polypropylene sprinkler pump for general all-around duties including potable water applications. Features and Benefits The supply voltage is 230VMaximum liquid temperature is 50°CInput power is 600W Maximum suction height of 7m with foot valveImpeller, diffuser/venturi system made from techno polymer Applications Irrigation of lawns and flowerbeds Washing of terraces or outdoors floors Basins or expansion tanks filling/draining Certifications IPX4 rated

W Robinson And Sons Water Pump The W Robinson And Sons heavy-duty contractor water pump is designed for high volume site drainage of murky and black water. It is an effective product with a maximum flow rate of 300L/minute. Durable and proven design with cast iron impeller, silicone carbide mechanical seals, and a water cooling jacket make this pump ideal for the most severe duty. Inclusion:10m power cord, site rope and hose clip. Features and Benefits The supply voltage is 230VInput power is 600W Applications Draining at engineering and construction sitesDraining at office buildings, factories, warehouses, basements etc.Water supply and draining at farms and homes

W Robinson And Sons Water Pump The W Robinson And Sons heavy-duty contractor water pump is designed for high volume site drainage of murky and black water. It is an effective product with a maximum flow rate of 290L/minute. Durable and proven design with cast iron impeller, silicone carbide mechanical seals, and a water cooling jacket make this pump ideal for the most severe duty. Inclusion:10m power cord, site rope and hose clip. Features and Benefits The supply voltage is 110VInput power is 0.7kW Applications Draining at engineering and construction sitesDraining at office buildings, factories, warehouses, basements etc.Water supply and draining at farms and homes

W Robinson And Sons Submersible Water Pump The W Robinson And Sons direct coupling submersible water pump is the latest device that manufactured from 304 stainless steel. It is an effective product with a maximum flow rate of 250s/minute. This is used in conditions where contamination or rust is unacceptable.Supplied with: 10m H07 RNF cable conforming to current regulations. Features and Benefits The supply voltage is 230VInput power is 1.1kW Maximum head is 8mOutput connection size is 2inMaximum fluid temperature is 50°C Thermal overload motor, double seal, lubricated in oil sump and interchangeable ceramic brush on rotating shaftInsulation class F Lubricated in oil sump and protected by V-ring sand-guardSelf-sealing Vortex system impeller in cast stainless steelFree passage of 40mm solids Applications Used to drain seepage To pump up clear and waste rain water from gratings or wells To pump waste and clear water of domestic, civil, and industrial use For channel irrigation system and water transferring from streams Basins and lakes Drainage of rooms, tanks and swimming pools of clear, waste, muddy, and slimy waterUsed also for industrial application such as spraying booths, transferring liquids, washing, etc.

Pump Booster Sets Monobloc pressure sets using self-priming centrifugal pumps. Supplied, tested and ready for use in single packing complete with high quality pressure switch, pressure gauge, brass 3-way connector, 24 litre horizontal cylindrical tank and flexible tubePump, tank and all connections manufactured from 304 stainless steel to eliminate risks of rust and contaminationPractical and efficient solution to water and pressure problems

W Robinson And Sons Submersible Water Pump The W Robinson And Sons submersible puddle buddy water pump is a high-quality all-round semi-professional and highly portable residue pump. This puddle pump is designed for clean water in domestic applications. It is an effective product with a maximum flow rate of 120L/min. The Puddle Buddy requires a minimum of 5mm of water to operate, prime, and start to pump. Features and Benefits The supply voltage is 230VInput power is 0.15kW Drains down to 1mmSelf-vents due to anti-airlock valveThe oil filled motor, provides perfect cooling which enables the pump to running dry for prolonged periodsThe use of strong and flexible elastomers makes the pump very light weight while providing a strong and rugged pump suitable for semi-professional use

W Robinson And Sons Submersible Water Pump The W Robinson And Sons submersible wastewater pump is the latest device manufactured from 304 stainless steel. This centrifugal pump is used in conditions where contamination or rust is unacceptable. It is an effective product with a maximum flow rate of 160L/minute.Inclusion:10m H07 RNF cable conforming to current regulations. Features and Benefits The supply voltage is between 1V to 240VMaximum fluid temperature is 50°C Thermal overload motor, double seal, lubricated in oil sump and interchangeable ceramic brush on rotating shaftInsulation class F Lubricated in oil sump and protected by V-ring sand-guardSelf-sealing vortex system impeller in cast stainless steelFree passage of 20mm solids Applications Used to drain seepage To pump up clear and waste rainwater from gratings or wells To pump waste and clear water of domestic, civil, and industrial use For channel irrigation system and water transferring from streams Basins and lakes Drainage of rooms, tanks and swimming pools of clear, waste, muddy, and slimy waterUsed also for industrial application such as spraying booths, transferring liquids, washing, etc

Residue & Puddle Pump A residue or puddle pump which can be used as a normal submersible pump in clean water. This pump can run on while waste or flood water is swept towards it allowing the last dregs of flood or spillage water to be pumped away. Will continue to pump water at levels down to 1mm when used on a flat surface Ideal for boiler houses, hospitals, warehouses and anywhere requiring water clean-up operationsAvailable in both 110 and 230V versions 120 litres/minute flow capacityIncorporate automatic overload protection

W Robinson And Sons Submersible Water Pump The W Robinson And Sons submersible foul water pump is the latest device manufactured from 304 stainless steel. This centrifugal pump is used in conditions where contamination or rust is unacceptable. It is an effective product with a maximum flow rate of 400L/minute. It is suitable for all lifting and draining applications for clear and dirty water in civil and industrial sewage.Inclusion:10m H07 RNF cable conforming to current regulations Features and Benefits The supply voltage is 230VInput power is 1.6kW Thermal overload motor, insulation class F Serial mechanical seal made of graphite and aluminium Lubricated in oil sump and protected by V-ring sand-guardSelf-sealing Vortex system impeller in cast stainless steelAutomatic float switchFree passage of 40mm solidsIncorporate automatic overload protection Supplied with UK 13A 3 pin plug.

W Robinson And Sons Submersible Water Pump The W Robinson And Sons submersible puddle buddy water pump is a high-quality all-round semi-professional and highly portable residue pump. This puddle pump is designed for clean water in domestic applications. It is an effective product with a maximum flow rate of 120L/min. The Puddle Buddy requires a minimum of 5mm of water to operate, prime, and start to pump. Features and Benefits The supply voltage is 110VInput power is 0.15kW Drains down to 1mmSelf-vents due to anti-airlock valveThe oil filled motor, provides perfect cooling which enables the pump to running dry for prolonged periodsThe use of strong and flexible elastomers makes the pump very light weight while providing a strong and rugged pump suitable for semi-professional use

W Robinson And Sons Residue and the puddle water pump The W Robinson And Sons residue and the puddle water pump is the latest device used in clean water applications. It is an effective product with a maximum flow rate of 120L/minute. This can work on waste or flood water, allowing the last dregs of flood or spillage water to pump away. This will continue to pump water at levels down to 1mm when used on a flat surface. It is ideal for boiler houses, hospitals, warehouses, and any place requiring water clean-up operations. Features and Benefits The supply voltage is 230V Input power is 400WMaximum fluid temperature is 40°C Incorporate automatic overload protectionAsynchronous single phase motor with built-in thermal relayAll models have 10m HO5 RNF power cable and schuko plug Certifications IP68 rated

W Robinson And Sons Submersible Water Pump The W Robinson And Sons submersible wastewater pump is the latest device manufactured from 304 stainless steel. This centrifugal pump is used in conditions where contamination or rust is unacceptable. It is an effective product with a maximum flow rate of 200L/minute.Inclusion:10m H07 RNF cable conforming to current regulations. Features and Benefits The supply voltage is 230VInput power is 1.6kW Maximum fluid temperature is 50°C Thermal overload motor, double seal, lubricated in oil sump and interchangeable ceramic brush on rotating shaftInsulation class F Lubricated in oil sump and protected by V-ring sand-guardSelf-sealing Vortex system impeller in cast stainless steelFree passage of 20mm solids Applications Used to drain seepage To pump up clear and waste rainwater from gratings or wells To pump waste and clear water of domestic, civil, and industrial use For channel irrigation system and water transferring from streams Basins and lakes Drainage of rooms, tanks and swimming pools of clear, waste, muddy, and slimy waterUsed also for industrial application such as spraying booths, transferring liquids, washing, etc.