WAGO 294 Series Power Supply Terminal Blocks 294 series power supply terminal block connectors for the field connection of lighting fixtures and other devices. These 294 series lighting connectors can be used worldwide and allow connection of luminaires via WINSTA pluggable connectors or conventional wiring. The terminal blocks accommodate solid, stranded and fine stranded conductors with a wide cross section of 0.5 mm² to 2.5 mm² at the mains end. This cross section is equivalent to 18 AWG to 12 AWG (American Wire Gauge) and 0.8 mm to 2.0 mm (cross section of solid conductor on Asian Market). This feature makes the 294 series power supply terminal block ideal for use in America and Japan. A cage clamp connection allows conductors to be terminated without any preliminary preparation of the stripped conductor. These field wiring terminal blocks fulfil the requirements specified by household appliance standard IEC/EN 60335-1 which requires greater fire safety for unattended electrical household appliances. Versions of these 294 series terminal blocks are available with snap-in feet and PE ground contacts. Features and Benefits • Field connectable• Can be used world-wide• Wide cross section range of 0.5 mm² to 2.5 mm², ideal for use in America and Japan• Cage clamp connection for quick installation• Fullfill household appliance standard EC/EN 60335-1• Versions available with snap-in feet• Versions available with direct or screw in ground contacts Product Application Information These 294 series terminal blocks are ideal for use in lighting but also meet IEC/EN 60335-1 so they can also be used in other non-lighting applications. Applications include HVAC systems, pumps, garden appliances and white goods

WAGO PLC I/O Module, 28 to 14AWG Wire Size Range, 80mA Current Consumption - CJ2 Series - 750461 Choose this PLC I/O module from WAGO to link temperature sensing equipment with your processor. You can use it in conjunction with Pt100 sensors to reliably measure temperatures in your setup. Two analogue channels mean double the sensing capacity to boost your measuring ability. The housing is made of PC and PA, so it stands up to impact and corrosion for a long service life in harsh environments. It's a cinch to wire up without any tools, thanks to its cage clamp terminals. Features & Benefits • Maximum response time of 4s for quick results• IP20 rating means it's touchproof and protected against wires or tools larger than 12mm in size• LEDs signal operating status for monitoring at a glance• Compact dimensions of 100 (L) x 12 (W) x 64mm (D), so it's a space-efficient choice Applications • Automotive manufacturing• Factory automation• Power engineering How much does this PLC I/O module weigh? This PLC I/O module only weighs 52.5g, so it doesn't add excess load to your setup. Can I use this device in harsh industrial conditions? Yes. This unit delivers reliable performance in temperatures between 0°C and +55°C, so it's ideal for use in harsh industrial conditions.

The WAGO Terminal block is a two conductor ground terminal block. It is available in green and yellow colour with lever type actuation. This terminal block has polyamide insulation material with push in cage clamp connection technology. RoHS compliant0.2 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94

The WAGO Terminal block is a two conductor through terminal block. It is available in orange colour with operating tool type actuation. This terminal block insulation is made from polyamide material and it has push in cage clamp connection technology. RoHS compliant0.074 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94

WAGO 294 Series Power Supply Terminal Blocks 294 series power supply terminal block connectors for the field connection of lighting fixtures and other devices. These 294 series lighting connectors can be used worldwide and allow connection of luminaires via WINSTA pluggable connectors or conventional wiring. The terminal blocks accommodate solid, stranded and fine stranded conductors with a wide cross section of 0.5 mm² to 2.5 mm² at the mains end. This cross section is equivalent to 18 AWG to 12 AWG (American Wire Gauge) and 0.8 mm to 2.0 mm (cross section of solid conductor on Asian Market). This feature makes the 294 series power supply terminal block ideal for use in America and Japan. A cage clamp connection allows conductors to be terminated without any preliminary preparation of the stripped conductor. These field wiring terminal blocks fulfil the requirements specified by household appliance standard IEC/EN 60335-1 which requires greater fire safety for unattended electrical household appliances. Versions of these 294 series terminal blocks are available with snap-in feet and PE ground contacts. Features and Benefits • Field connectable• Can be used world-wide• Wide cross section range of 0.5 mm² to 2.5 mm², ideal for use in America and Japan• Cage clamp connection for quick installation• Fullfill household appliance standard EC/EN 60335-1• Versions available with snap-in feet• Versions available with direct or screw in ground contacts Product Application Information These 294 series terminal blocks are ideal for use in lighting but also meet IEC/EN 60335-1 so they can also be used in other non-lighting applications. Applications include HVAC systems, pumps, garden appliances and white goods

WAGO 294 Series Power Supply Terminal Blocks 294 series power supply terminal block connectors for the field connection of lighting fixtures and other devices. These 294 series lighting connectors can be used worldwide and allow connection of luminaires via WINSTA pluggable connectors or conventional wiring. The terminal blocks accommodate solid, stranded and fine stranded conductors with a wide cross section of 0.5 mm² to 2.5 mm² at the mains end. This cross section is equivalent to 18 AWG to 12 AWG (American Wire Gauge) and 0.8 mm to 2.0 mm (cross section of solid conductor on Asian Market). This feature makes the 294 series power supply terminal block ideal for use in America and Japan. A cage clamp connection allows conductors to be terminated without any preliminary preparation of the stripped conductor. These field wiring terminal blocks fulfil the requirements specified by household appliance standard IEC/EN 60335-1 which requires greater fire safety for unattended electrical household appliances. Versions of these 294 series terminal blocks are available with snap-in feet and PE ground contacts. Features and Benefits • Field connectable• Can be used world-wide• Wide cross section range of 0.5 mm² to 2.5 mm², ideal for use in America and Japan• Cage clamp connection for quick installation• Fullfill household appliance standard EC/EN 60335-1• Versions available with snap-in feet• Versions available with direct or screw in ground contacts Product Application Information These 294 series terminal blocks are ideal for use in lighting but also meet IEC/EN 60335-1 so they can also be used in other non-lighting applications. Applications include HVAC systems, pumps, garden appliances and white goods

The WAGO Terminal block is a four conductor disconnect or test terminal block. It is available in blue colour. This terminal block insulation is made from polyamide material and it has push in cage clamp connection technology. RoHS compliant0.196 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94

The WAGO Quadruple deck rail mounted terminal block is used for electric motor wiring. It is available in grey colour with push in cage clamp technology. The insulation of this product is made from polyamide material. RoHS compliant0.067 MJ fire loadRailway approvedV0 flammability class per UL94

Mini feed-through connections for TS 35 rails Mini feed-through connections for mounting on TS 35 type DIN rails and designed to fit into small enclosures.Two versions of these terminals are available, for 2 or 4 conductors.

The WAGO Terminal block is a four conductor sensor supply terminal block. It is available in orange colour with ground contact. This terminal block insulation is made from polyamide material and it has push in cage clamp connection technology. RoHS compliant0.313 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94

The WAGO Terminal block is a two conductor shield terminal block. It is available in white colour with operating tool type actuation. This terminal block has polyamide insulation material with push in cage clamp connection technology. RoHS compliant0.106 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94

The WAGO Terminal block is a four conductor through terminal block. It is available in red colour. This terminal block insulation is made from polyamide material and it has push in cage clamp connection technology. RoHS compliant0.107 MJ fire loadDIN 35 rail mountingV0 flammability class per UL94