<B>WERMA Red LED Beacon, 115 to 230V AC, Double Flash - BWM 853 Series - 853.110.60</B> Alert personnel to a fault in a system with this red beacon from WERMA. The LED bulb is easy to see in most lighting conditions. Its versatile surface-mounting design means you can place it on any flat base, wall or ceiling. The unit comes with a handy snap-on fixing bracket that saves time and effort during installation. As it consumes a maximum current of just 80mA at 24V, it's an energy-efficient and cost-effective choice. <B>Features & Benefits</B> • Intense double-flash effect for an urgent warning signal<BR/>• Comes with eight self-sealing membranes for tool-free cable entry <BR/>• Long average service life of 50,000 hours for long-lasting performance<BR/>• Wide operating temperature range of -25°C to +50°C for use in demanding environments<BR/>• IP66 (ingress protection) rating means it's dust-tight and protected against high-pressure water jets <B>Applications</B> • Clean rooms<BR/>• Food industry<BR/>• Automotive and mechanical industries <B>Can you connect two or more of these beacons together?</B> Yes. The device's innovative connector allows you to connect multiple beacons to create a complete traffic light signal.

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

<B>WERMA Double-Flash Yellow LED Beacon, 85mm Base Width, 24V DC Voltage Rating - BWM 853 Series - 853.310.55</B> Quickly draw attention to hazardous workplace conditions with this yellow beacon from WERMA. Its double-flash LED bulbs produce an intense light that's easy to see in most lighting conditions. For ease of installation, the unit comes with snap-on fixing brackets. Simply drill two holes into your mounting surface and click the beacon into place. The durable PC lens is resistant to impact and wear, so it can withstand use in harsh conditions. <B>Features & Benefits</B> • Eight self-sealing membranes for tool-free cable entry<BR/>• Long optical life of up to 50,000 hours for long-lasting performance<BR/>• IP66 rating means it's dust-tight and protected against high-pressure water jets <B>Applications</B> • Warehouses and packaging facilities<BR/>• Automotive industry<BR/>• Construction and building sites <B>Where can I mount this beacon?</B> This signal beacon is suitable for wall, surface or ceiling mounting, making it a versatile choice.

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

<B>WERMA Red LED Double-Flash Beacon, 24V DC, 80mA - BWM 853 Series - 853.120.55</B> Quickly warn personnel of an emergency situation with this LED beacon from WERMA. Its LED bulb is visible in most light conditions and produces a double-flash effect for an urgent signal. Its long service life of 50,000 hours means it won't need frequent replacement. Thanks to the quick-release screws in its base, it's simple to assemble and disassemble as needed. The glass fibre-reinforced polypropylene (PP-GF) housing material is resistant to impact and heat for use in harsh industrial environments. <B>Features & Benefits</B> • Screw terminals for a secure electrical connection<BR/>• IP67 (ingress protection) rating for protection against dust and submersion in 1m of water for up to 30 minutes when used with a cable gland<BR/>• Broad operating temperature range of -25°C to +50°C for use in hot and cold environments <B>Applications</B> • Fire alarm systems<BR/>• Machine maintenance<BR/>• Warehouses and loading areas <B>How can I mount this flash beacon?</B> The beacon is supplied with a fixing bracket for ease of installation. Simply screw two holes in your wall, attach the fixing bracket and snap the beacon into place.

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

LED Beacon - 853 Series The 853 Series of LED beacons from Werma are available in 3 options, the permanent beacon, the intense double flash beacon with low power consumption and the attention grabbing EVS beacon with flickering light. All three models can be wall, base and ceiling mounted. They also save on installation time thanks to a snap-on fixing bracket: simply drill two holes, attach the fixing bracket to the wall and snap on the beacon. The cable can be fed through one of the eight self-sealing membranes without the need for any tools. Once the cable has been connected to the terminals, the lens can be clipped onto the base and secured using the four captive quick release screws Wall, base and ceiling mounted<BR/>IP65 protection rating (with cable gland)<BR/>Life duration of up to 50,000 hrs<BR/>LED beacon in attractive quadratic form<BR/>Innovative connector to create traffic light combinations<BR/>Easy assembly due to quick release screws<BR/>Eight self-sealing membranes for cable entry without tools<BR/>Eight integrated M20 threads, no nuts required<BR/>Conforms to the Low Voltage Directive and EMC Directive<BR/>CE Mark, UL 508 standard

<B>WERMA Green LED Beacon, Surface and Wall Mount, 230V AC - BWM 853 Series - 853.200.60</B> Indicate that machines are running normally and areas are safe to enter with this permanent green beacon from WERMA. The snap-on bracket makes it simple to mount. It can be fixed to walls, ceilings or panels, making it a versatile choice for your workplace. The unit comes with quick-release screws and integrated threads to speed up installation, as well as self-sealing cable membranes for tool-free wiring. For long-lasting and reliable performance, this beacon has a service life of 50,000 hours – the energy-efficient LED (light-emitting diode) bulb uses minimal power. Install this beacon on its own as a safety signal, or make a traffic light system by attaching yellow (746-5013) and red beacons (746-5016) from the WERMA BMW 853 range. <B>Features and Benefits</B> • Wide operating temperature range of -25°C to +50°C for use in challenging environments<BR/>• Made from glass-filled plastic and polycarbonate (PC), making it impact-resistant and shatterproof<BR/>• IP66 (ingress protection) rating for resistance to dust and strong water jets <B>Application Information</B> • Machine safety<BR/>• Logistics and shipping<BR/>• Automated entry systems <B>Can I connect this beacon to a standard electricity supply?</B> Yes, it works with supply voltages between 115V AC and 230V AC, so you can use it with most standard setups.

<B>WERMA Red LED Beacon, 24V DC - BWM 853 Series - 853.100.55</B> Improve system safety and security with this permanent beacon from WERMA. The bright red LED (light-emitting diode) features an eye-catching quadratic design. An innovative connector lets you create a stop-slow-go traffic signal by adding yellow and green beacons. This unit is easy to install thanks to the snap-on fixing bracket that mounts quickly on walls, bases and ceilings. Once installed, the eight self-sealing membranes along the sides limit the need for cables and let you connect additional beacons on any side. <B>Features and Benefits</B> • 72mm height and an 85mm square base for use in compact spaces<BR/>• Conforms to the low-voltage directive, so you can be sure it's safe to use<BR/>• Adheres to EMC (Electromagnetic Compatibility) standards, indicating it's built to limit electromagnetic interference <B>Applications</B> • Automotive industry<BR/>• Mechanical engineering<BR/>• Logistics and shipping <B>Will this beacon work in tough industrial environments?</B> Yes, the bulb's housing is made from polypropylene and glass fibres, so it's tough and able to withstand a range of conditions. The unit is built to perform in temperatures ranging from -25°C to +50°C and is rated IP (ingress protection) 65, indicating it's dust-tight and water-resistant.