Schneider Electric LC1D TeSys D Contactors.
TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.
Features and Benefits.
- Built-in auxiliary contacts for added switching capability.
- Screw connections: IP20 finger-safe terminals with both North American and International terminal markings.
- Can be panel mounted with screws or DIN Rail mounted.
- Bidirectional peak limiting diode suppressor to protect the coil.
- Easily installed accessories.
- Flexible control circuit to suit a wide range of applications.
- Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
- AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
- AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.
- Auxiliary contact blocks with serrated wiping action.
- Front mount dust tight auxiliary contact blocks.
- Pneumatic time delay blocks.
- Transient voltage surge suppressors.
- Interface modules and electronic timers.
- Mechanical latching blocks.
- Yes, the Tesys D range uses linear translation movement that provides double breaking of the poles.
- Motor Control and Resistive load applications.
- AC-1, AC-3, AC-4 category.
- Ue Rated voltage Power circuit <= 300 V DC 25...400 Hz, Power circuit: <= 690 V AC 25…400 Hz for power circuit.
- Rated current 12 A (<= 60 °C) at <= 440 V AC AC-3 for power circuit, 16 A (<= 60 °C) at <= 440 V AC AC-1 for power circuit
- 24 V AC 50/60 Hz Control circuit voltage.
- 1 NO + 1 NC auxiliary contact.
- Overvoltage category III.
- Rated breaking capacity 250 A at 440 V for power circuit conforming to IEC 60947.
- Complete with a protective cover.
- Plate and Rail mounting.
- IP20x front face conforming to IEC 60529.
TeSys D LC1D Contactor, 24 V ac Coil, 3-Pole, 16 A, 7.5 kW, 3NO, 300 V dc, 690 V ac
Manufacturer:
Schneider Electric
Manufacturer Part No:
LC1D123B7
Enrgtech Part No:
ET14096953
Warranty:
Manufacturer
£ 50.88
Checking for live stock
Coil Voltage:
24 V ac
Number of Poles:
3
Contact Voltage Rating:
300 V dc, 690 V ac
Contact Current Rating:
16 A
Range:
TeSys D
Power Rating:
7.5 kW
Series:
LC1D
Normal State Configuration:
3NO
Number Of Auxiliary Contacts:
1
Auxiliary Contact Configuration:
1NO + 1NC
Terminal Type:
Spring
Width:
45mm
