Overview The S3000 Standard is the economic solution for protecting hazardous points, danger zones and entrances, as well as for protecting automated guided vehicles. The S3000 Standard is designed for simple applications with one protective field. By the proven triple field mode and the function of simultaneous monitoring of up to four protective fields- in combination with the SICK safety controller- mobile and stationary applications are more efficiently implemented. The integrated EFI interface also allows additional sensor functions, e.g. connecting SICK safety controllers. The system plug with built-in configuration storage enables rapid device replacement without using a laptop. CDS (Configuration & Diagnostic Software) can be used to define protective and warning fields in a convenient and standardized way on a PC or laptop. At a glance 4 m, 5.5 m or 7 m protective field range 1 field set Configuration memory integrated in the system plug Interface (EFI) for reliable SICK device communication Selectable resolution for hand, leg or body detection Simultaneous monitoring of up to 4 protective fields Contour as reference for vertical applications Integrated external device monitoring (EDM) Your Benefit Large protective field range of 7 m enables a large variety of applications Safety technology – with no loss of productivity Quick recommissioning via configuration memory Modular expansions, low wiring effort and additional functions such as the simultaneous monitoring of up to four protective fields using a SICK safety controller via EFI Easy installation, commissioning and maintenance for stationary and mobile applications Decades of proven safety technology guarantee maximum reliability and availability – even under difficult conditions Simple alignment and reliable operation in vertical mode Applications Fields of applications Hazardous area protection or presence detection at loading and unloading stations Hazardous area protection at production lines an...