ACD-10 PLUS 600A Clamp Meter The ACD-10 PLUS Current clamp meter offers thinner jaws over standard clamp meters. The digital clamp meter takes AC/DC measurements and offers Capacitance and Frequency. The clamp meter also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 26mmAC and DC Voltage to 600VAC Current to 600AThin Jaws, only 10mm thickResistance to 40MΩContinuity BuzzerCapacitance to 3000 μFFrequency measurementIn rush current Hold and Maximum reading functionsAccommodates conductors up to 26mm in diameterAuto rangingAuto power offRubber over-molded caseOverload protected

PM55A Shirt-Pocket Precision DMM with AutoTect & VolTect The Amprobe PM55A is the ultimate pocket sized multimeter. Being 20 mm think and less than 85 g with full functionality offering AC and DC voltage measurements. Features and Benefits 10.2mm thick and weighs less than 80gMeasures ac and dc voltage to 600V, ac and dc current to 2000μA, resistance to 6 MΩ, capacitance to 2000μF, frequency to 30kHz, diode test and continuity with beeperAutoTect™ feature directs the meter to know if it is measuring ac volts, dc volts or resistance with no user interface requiredThe AutoTect™ feature has lower input impedence which zeros out ghost voltagesMeter includes VolTect™, which is a built-in, non-contact voltage detectorComplete user protection with full safety ratings of CAT III 300 V, CAT II 600VLarge 4000 count LCD screenData holdAuto power off AutoTect The AutoTect feature automatically selects between AC and DC voltage, or resistance measurements based on the test point to which the leads are connected. Fully auto ranging, this meter offers nine different measurement functions please features that are normally found in more expensive meters. Digital Display and Safety The oversized digital display uses large digits and unit icons for easy readability. The PM55A is fully rated to CAT III 300 V, CAT II 600 V ad is UL listed.

ProInstall Series USB Cable and Driver The Telaris ProInstall Series have an IR (infrared) port which allows you to connect the tester to a computer and upload test data using a Amprobe PC software.This automates your troubleshooting or recording process, reduces the possibility of manual error and allows you to collect, organize, and display test data in a format that meets your needs.

ACD-14 Plus 600A Dual Display Clamp Multimeter The ACD-14 PLUS clamp meter is the perfect choice for both HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance and frequency. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 Plus 600A Dual Display Clamp Multimeter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 28 mmDual DisplaysAC Current to 600A New thin jaws, 5 mm thinner than others to access tight measurement spaces Micro Amps measurement for testing Flame Sensors Capacitance to 3000 μF Temperature with Type-K Thermocouple probe AC and DC Voltage to 600V Resistance to 40MΩContinuity Buzzer Frequency measurement Diode test Hold and Maximum reading functions In rush current Accommodates conductors up to 28 mm in diameter Auto ranging Auto power off and low battery indication Rubber over-molded case

LH41A AC/DC Current Clamp Meter This current clamp meter has been designed for reliable and accurate non-intrusive measurement of DC and AC currents using advanced Hall Effect technology. Measures AC and DC current into the low milliamp range up to 40AAuto Zero DC for correct measurement every timeHigh 1 mA current resolution for quick circuit comparison on sensor and control circuitsAuto rangingData HoldAuto power off function

TACH20 hand-held tachometer Measures length, rotational and linear speedBuilt-in memoryDigital displayAuto power-off functionSimple user interfaceContact and non-contact measurementSelect rpm using laser or adapter: m/min, m/sec, ft/min, ft/sec, in/min, m, ft and in.

LM-100 and LM-120 light meters Switch between measurements in lux or foot-candlesMeasuring range of 20,000 lux or foot-candlesSilicon photodiode sensorData Hold to freeze readings on the displayMIN / MAX functionProtective sensor cap includedLarge 3 1/2-digit digital display LM-120 additional features Automatic or digital scaleZero function to null display before a readingAuto power-off function

Amprobe LAN-1 Network Cable Tester Designed to work with various data cables and connectors, this cable tester provides a fast go / no-go LED display. It has the ability to either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs to display the results.Test opens, shorts and miswired cables, verify the wiring for continuity on wall plate or patch panels. Features and Benefits: • Loopback test or remote test• Buzzer sound for errors in the cable• 300m maximum line length• Approx. 20 hour battery life• 2 sets of LED, signal and test Frequently asked questions: What is a LAN cable tester? LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable. How do network cable testers work? Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems. What is the difference between RJ45 & RJ11? RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ’registered jack’.

Amprobe 35XP-A Digital Multimeter with Temperature The compact 35XP-A Digital Multimeter offers all the right features for HVAC and plant maintenance. It measures temperature, plus capacitance for motor run/start test, and offers 0.1 μA resolution for flame sensor testing. Features and Benefits: • Compact, multifunction digital multimeter for industrial maintenance, heating/ventilation/air conditioning/refrigeration, electricity and electronic applications• Automatic ranges for fast measurements• 4000 point resolution, basic accuracy of 0.5 %• 750 Vac / 1000 Vdc• 2A AC/DC, resolution of 0.1 μA for flame detector tests• Frequency of up to 20 MHz• Resistance of up to 40 Mohms• Temperature with type K thermocouple up to 1000 °C• Capacitance of up to 4000 μF for engine function/start-up tests• Audible continuity indicator• Display freeze• Diode test• Voldetect™• Magne-Grip™ case• Device auto-stop• Anti-overload/input alarm protection