Type A - NFC Earth Leakage RelayIntuitive app with pre-defined “user profiles” for specific applicationsUser configurable Auto-reclosure operation and Filter cut-off pointsSelectable Trip level (0.006 - 1A) and Time delay (0 - 10s)1 x SPDT/1 x SPNO Relay outputs (user configurable)Multi-voltage (24 - 230VAC/DC)

The product is designed to monitor the status of the externally wired contacts and operate/alternate the output relays in turn on each closure of the contact. A “help” function is included such that it allows the second relay to energize (after a short delay) when the other contact is closed. An auxiliary supply (required to power the unit) must be present for the product to function. Logic Relay designed to balance wear between motors, compressors and generatorsMonitors 2 external N.O. contactsBuilt in “Help” functionIsolated Auxiliary supply2 x SPNO Relay outputs44mm wide, DIN Rail mount

Broyce Control LBVR/A 12-24VDC, Voltage Monitoring Relay With SPDT Contacts, Undervoltage

BZCT Earth Leakage Detection Toroid Circular ToroidsFor use with ELRM44V-30Designed to detect leakage current and transmit a proportional signal to an Earth Leakage RelaySurface mountingInstallation/Data sheet supplied

L Series - Selectable Control Relays L Series relay range of timers, control and three phase relays incorporate the latest technology and offer a wide range of user adjustable features. 17.5mm DIN rail housingMicroprocessor basedTrue R.M.S. monitoringIsolated auxiliary supply (24 - 230 V ac/dc)1 x SPDT relay output 8AGreen LED indication for supply status

LX Series - Three Phase Relays L Series relay range of timers, control and three phase relays incorporate the latest technology and offer a wide range of user adjustable features. 17.5mm DIN rail housingMicroprocessor basedMeasures phase to phase voltages1 x SPDT relay output 8AGreen LED indication for supply statusRed LED indication for relay status

BZCT Earth Leakage Detection Toroid Circular ToroidsFor use with ELRM44V-30Designed to detect leakage current and transmit a proportional signal to an Earth Leakage RelaySurface mountingInstallation/Data sheet supplied

Broyce Control Earth Leakage Detection Toroid The Broyce Control earth leakage detection toroid is a device to detect leakage current and transmit a proportional signal to an earth leakage relay with a current ratio of 1:1000. It is for use in conjunction with all Broyce “Type A” Earth Leakage Relays that require external sensing means. It has rated system voltage of 720VAC and current rating of 65A. Supplied with Installation/Datasheet Features and Benefits Inner diameter is 35mmCircular toroidsFor use with ELRM44V-30Maximum distance between toroid and ELR is 50mSurface mountHousing is grey ABSSlim designInsulation level is 3kVACOverall height of 74mm, width of 64mm and depth of 40mmOperating temperature ranges between -20°C and 60°C Certifications ANSI/ESD S20.20:2014BS EN 61340-5-1:2007CE certifiedUL approvedIEC44-1IEC185BS7676

The Broyce Control LXCVR-EV monitor relay is designed for EV charging applications that do not require the use of an earth rod. This monitors the single phase supply voltage to the charger, and in conjunction with a contactor, disconnects the supply to the charger if the voltage exceeds the fixed trip levels. Fixed Time delay (from Under or Over voltage condition) – 4sTrue R.M.S. monitoringHysteresis is ≈2%1 x SPDT relay output 8AGreen LED indication for supply statusRed LED indication for relay/timing status17.5mm DIN rail housingUL Listed

The Broyce Control LDRT 230VAC Mains Restoration “Brown Out” auto restart timer Detects voltage dips and momentary loss or interruption of supply and “Delay on operate” functionality provides an adjustable delay period before the relay energises. Fixed reset timeAdjustable time delayCompact 17.5mm DIN rail housing

The timer is offered with two separate relays. When power is applied, the first relay (Attempts) will energize for the set “on” time delay period, then de-energize for the set “off” time delay period. This is classed as the “first attempt”. The same relay will continue to cycle on and off for the “number of attempts” set on the adjustment. If all the attempts are allowed to run, at the end of the last “on” time delay period, the first relay will de-energize and the second relay (Alarm) will energize and remain in this state. Power must be removed and re-applied to restart the function over again. Multi Attempt to StartDesigned to limit the number of attempts an engine has to start before providing an alarmSelectable number of attempts (2-8)Multi-voltage (12 -48VAC/DC)Single time range (1 - 60s)2 x SPDT Relay outputs17.5mm wide, DIN Rail mount

Type A - NFC Earth Leakage RelayIntuitive app with pre-defined “user profiles” for specific applicationsUser configurable Auto-reclosure operation and Filter cut-off pointsSelectable Trip level (0.03 - 30A) and Time delay (0 - 10s)1 x SPDT/1 x SPNO Relay outputs (user configurable)Multi-voltage (24 - 230VAC/DC)