The CL6 is a fixed, linear current regulator designed for driving high brightness LEDs at 100mA from nominal 12V, 24V, or 48V supplies. With a maximum rating of 90V, it is able to withstand transients without the need for additional transient protection circuitry. The CL6 is offered in both TO-252 (D-PAK) and TO-220 packages. The tab on the TO-220 is ground, allowing heatsinking directly to a chassis without the need for electrically insulating spacers. Overtemperature protection shuts off the LED current when the die temperature rises above 135°C (nominal). Full LED current resumes when the die temperature falls below 105°C (nominal).
Additional Features:
100mA ±5% constant current drive
Built-in reverse polarity protection
Dimmable via PWM supply
Overtemperature protection
Tab ground allows direct heatsinking to chassis
90V max rating for transient immunity
100mA ±5% constant current drive
Built-in reverse polarity protection
Dimmable via PWM supply
Overtemperature protection
Tab ground allows direct heatsinking to chassis
90V max rating for transient immunity
CL6N5-G LED Driver IC, 90 V dc 120mA 3-Pin TO-220
£ 1.40
Checking for live stock
Output Current:
120mA
Input Voltage:
90 V dc
AC or DC Input Voltage:
dc
Dimming Operation:
PWM
Application:
Flashlights, Low Voltage Lighting, Low Voltage Signage, Specialty Lighting
Package Type:
TO-220
Number of Pins:
3
Maximum Output Voltage:
90V
Minimum Output Voltage:
4V
Current Rating:
50 → 120mA
Series:
CL6
