4.3&#148; Display with Analogue, Digital, PWM and Serial Interfaces SGD 43-A is a 4.3&#148; capacitive touch display designed for use with PanelPilotACE Design Studio, a free drag-and-drop style software package for rapid development of advanced user interfaces and panel meters. The off-the-shelf display features a wealth of hardware interfaces, including four 16-bit bipolar analogue inputs (to a maximum of ±40 V dc) eight digital input/output pins, two alarm outputs, four 8-bit PWM outputs and serial RS232. Accessories are also available to measure RS485 and temperature. <B>Features and Benefits</B> 4.3&#148; TFT screen with 262k colours<BR/>Capacitive touch-screen functionality<BR/>4 analogue inputs (±40 Vdc or 4-20 mA, 16 bit)<BR/>8 digital input/output pins<BR/>4 PWM outputs (8 bit)<BR/>2 alarm outputs<BR/>Power supply 5-30 Vdc (300 mA typical at 5 Vdc)<BR/>Windows-based drag and drop construction<BR/>Programmable with the USB interface<BR/>1Gbit DDR2 SDRAM memory inside<BR/>Simple panel mounting solution<BR/>Screw terminal connections<BR/>Communicate with other devices using RS-232, I²2C or SPI<BR/>Outside dimensions are 119.3 x 79.8 x 20.0 mm If you're new to the PanelPilotAce community or perhaps wondering what extra functionality Version 2.0 can add to your application, watch the following link to see some of the top tips and techniques for rapid display development:<BR/><BR/>https://www.youtube.com/watch?v=4KghwiHcA3M The development kit, SGD 43-A-DK+ (<a href="/web/p/products/8187354">818-7354</a>) is the best choice if you are starting to develop on the PanelPilotACE platform. It includes all you need to begin: an SGD 43-A, a development board and a USB cable. The board provides switches, dials, LEDs and screw terminal connections for all the input and output functionality of the SGD 43-A.

Lascar Digital Voltmeter The Lascar digital voltmeter is a compact, low-cost LED module, ideally suited for applications that require a bright display under all conditions. The device is fitted with high-efficiency, very low current LEDs and housed in a carrier with the integral snap-in bezel. The small size and low cost of the unit make it suitable for a high volume OEM applications. Its full-scale reading is 200mVDC and supply voltage ranging between 4.75VDC and 5.25VDC. Features and Benefits Digit height is 8mm (0.31in)<BR/>Programmable decimal points<BR/>Auto-zero<BR/>Auto-polarity<BR/>Full scale reading (F. S. R.) is 200mVDC<BR/>Very low current consumption<BR/>Number of digits are 3.5<BR/>Operating temperature ranging between 0°C and 50°C Certifications ANSI/ESD S20.20:2014 <BR/>BS EN 61340-5-1:2007

19mm, 3.5 Digit LCD, Type K, Temperature Indicator with LED Backlighting Cold function compensation allows operation in ambient temperatures from 0 to 50°C without affecting accuracy<BR/>Degrees centigrade reading<BR/>Two potentiometers for calibration<BR/>Connections via screw terminals<BR/>Mounting bezel and window supplied<BR/>Optional, IP67 rated, alloy bezel available<BR/>Accuracy ± 1% (± 1 count)

Lascar Data Loggers The Lascar EL-USB-5 standalone data logger can record events, record state changes and count events. Over 32,000 events or state changes can be recorded or over 32,000 timed intervals in count per mode. It is also possible to use V free contacts. Instead of measuring an external voltage, the data logger applies a voltage across the screw terminals and detects when the input closes. The logger can record events at speeds of up to two times per second and state changes at speeds of up to four times per second. In counting modes, the logger can operate at speeds of up to 100 counts per second. The user can easily set up the logger and view the downloaded data by plugging the data logger into a PC&#146;s USB port and using the available free downloadable EasyLog software. Data can then be graphed, printed and exported to other applications.<BR/><BR/>Supplied with<BR/>1/2 AA battery, measurement leads and wall mount clip Features and Benefits Maximum event/state frequency change is 2Hz <BR/>Maximum count per frequency 100hz<BR/>Log up to 4 state changes/second or 2 events/second <BR/>Number of readings per channel is 32510<BR/>Selectable input voltage range up to 28VDC<BR/>Rising and falling edge triggering <BR/>Connection via two screw terminals <BR/>Status indication via red and green LEDs<BR/>Battery life is up to 1 years<BR/>Supplied with a 1/2AA lithium metal battery Applications Outside environmental data<BR/>Facilities management

<B>Rechargeable Temperature Data Logger with USB</B> The EL-USB-1-RCG is a standalone USB data logger from Lascar. This device will measure and store more than 32,000 temperature readings over a -20 to +60°C range. <BR/><BR/>The polycarbonate window and stainless steel 316 assembly protects from corrosion, impact and water ingress to IP67/NEMA 4X.<BR/><BR/>Users can easily set up their device by connecting the data logger to a PC's USB port, using the free EasyLog software. In the software, users can also view and download all their recorded data. <B>Features and Benefits</B> -20 to +60°C (-4 to +140°F) measurement range<BR/>Stores over 32,000 readings<BR/>EasyLog software available as a free download<BR/>Stainless steel (316 grade) case<BR/>Rechargeable Lithium-Ion battery<BR/>Logging rates between 1 second and 12 hours<BR/>Immediate and delayed logging start<BR/>User-programmable alarm thresholds<BR/>Red & green status LEDs behind protective glass window<BR/>Environmental protection to IP67<BR/>Supplied with Type A-Mini B USB cable <B>Applications</B> Food Temperature Monitoring <BR/>Facilities Management <BR/>Housing and Business Premises

RS485 Add-on Board for SGD 43-A The S43-RS485 is an RS485 add-on board used as an accessory for the SGD 43-A 4.3&#148; PanelPilotACE display module. The S43-RS485 mounts onto the rear of the SGD 43-A display module and provides a three wire RS485 interface and an optional 120 Ω terminator. <B>Features and Benefits</B> Allows RS485 communication for the SGD 43-A display<BR/>Software supports ASCII-based serial communication and Modbus (RTU) protocol

Development Kit for the SGD 70-A The development kit is a state-of-the-art board that allows users to connect and test the input and output functionality of the SGD 70-A, PanelPilotACE display. The board includes LEDs and switches for digital I/O's, four potentiometers to generate analogue inputs, variable brightness LEDs for PWN outputs and a prototyping area for testing circuitry. Connections are also available for the display's RS232, RS485, SPI and I²C functionality. Features and Benefits 4 x analogue inputs each with ±5Vd.c. analogue dial and screw terminals for external inputs<BR/>8x digital I/O's each with input switch, status LED and pin headers to connect external circuitry<BR/>4 x PWN outputs each with LED indication and pin heads to connect external circuitry Certifications ANSI/ESD S20.20:2014 <BR/>BS EN 61340-5-1:2007

Four-Channel Thermistor Add-on Board The S70-TP is an accessory to the SGD 70-A PanelPilotACE display. The S70-TP mounts to the rear of an SGD 70-A providing four thermistor inputs which can then be utilised within the free PanelPilotACE Design Studio software to measure display, log and graph temperature readings. Supplied with a 1m thermistor probe fitted with a 3.5mm jack plug and featuring a potted metal sheath. Features and Benefits: Probe measurement range -40°C to +80°C<BR/>Internal resolution 0.01°C<BR/>Temperature accuracy ±1.0°C<BR/>

LCD Voltmeter with LED Backlighting This compact panel meter features a 3 digit LCD a low-profile bezel for mounting an LED backlighting. With 200mV d.c. full scale reading, auto-zero and auto-polarity this meter plugs straight into a single-in-line socket or can be panel mounted using the snap-in bezel and window supplied. Features and Benefits: 12.5mm digit height<BR/>Logic selectable Decimal Points<BR/>Auto-zero<BR/>Auto-Polarity <BR/>200mV d.c. Full Scale Reading <BR/>LED Backlighting

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application.<BR/>Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. <BR/>Single hole mounting<BR/>12.5mm LCD digit height<BR/>Full scale reading with different versions:<BR/> - 200mV<BR/> - 2V<BR/> - 20V<BR/> - 200V<BR/> - Different Decimal Point configurations<BR/>3-Wire connection<BR/>Auto-zero, auto-polarity<BR/>Low battery warning<BR/>Splashproof

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application.<BR/>Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. <BR/>Single hole mounting<BR/>12.5mm LCD digit height<BR/>Full scale reading with different versions:<BR/> - 200mV<BR/> - 2V<BR/> - 20V<BR/> - 200V<BR/> - Different Decimal Point configurations<BR/>3-Wire connection<BR/>Auto-zero, auto-polarity<BR/>Low battery warning<BR/>Splashproof

12.5mm, 3.5 Digit 3-wire Voltmeter, Lascar EMV1025S EMV 1025S is an easy to mount LCD digital voltmeter. It features full scale reading, fitted to the panel by locating its screw threaded stud through the hole, adding the washer and tightening the nut provided. The module's connections pass through the hollow stud into the target application.<BR/>Installation time is greatly reduced with only 3 wires to connect. The user need only drill a single 5.5mm hole in the panel. <BR/>Single hole mounting<BR/>12.5mm LCD digit height<BR/>Full scale reading with different versions:<BR/> - 200mV<BR/> - 2V<BR/> - 20V<BR/> - 200V<BR/> - Different Decimal Point configurations<BR/>3-Wire connection<BR/>Auto-zero, auto-polarity<BR/>Low battery warning<BR/>Splashproof